Datasheet > A-1001SRD-A

A-1001SRD-A

更新时间： 2022-02-26 15:00:09

品牌	Logo	应用领域
台湾光鼎 - PARALIGHT		/
页数	文件大小	规格书
10页	197K
描述
1.00 INCH SINGLE DIGIT DISPLAY

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

A-1001SRD-A 数据手册

Release

PARALIGHTDCC

1.00 INCH SINGLE DIGIT DISPLAY

REV:A / 0

A-1001SRD-A B/W

—SOLDERING

METHOD

SOLDERING CONDITIONS

REMARK

— Solder no closer than 2mm from

the base of the package

DIP

Bath temperature: 260 max

Immersion time: within 5 sec

SOLDERING

— Using soldering flux,” RESIN FLUX”

is recommended.

—During soldering, take care not to

press the tip of iron against the

Soldering iron: 30W or smaller

SOLDERING

Temperature at tip of iron: 260℃ or lower PIN.

Soldering time: within 5 sec. (To prevent heat from being

transferred directly to the PIN.)

IRON

1) When soldering the PIN of Display in a jig that the package is fixed with a panel (See fIg.1), be

careful not to stress the PIN with iron tip. When soldering Display in a condition that the package

is fixed with a panel, be careful not to cling and stress the surface of Display on the panel to avoid

damaging the Display.

Fig.1

Regarding solution in the tinning oven for product-tinning, compound sub-solution made of tin &

copper and silver is proposed with the temperature of Celsius 260. The proportion of the

alloyed solution is tin 95.5: copper 3.5: silver 0.5 by percentage. The time of tinning is constantly

3 seconds.

DRAWING NO. : DS-11-07-0167

DATE : 2010-05-08

Page : 5

1 2 3 456 7 8...10

下载PDF

与A-1001SRD-A相关器件

型号	品牌	描述	获取价格	数据表
A-1001UB-A	PARALIGHT	1.00 INCH SINGLE DIGIT DISPLAY	获取价格
A-1001Y	ETC	SINGLE DIGIT DISPLAY	获取价格
A1002	ETC	Desoldering Gun for HAKKO 474.475	获取价格
A1003	ETC	Desoldering Gun for HAKKO 474.475	获取价格
A10030-01	HAMAMATSU	Optical Components for Optical Measurement	获取价格
A10030-02	HAMAMATSU	Optical Components for Optical Measurement	获取价格