Datasheet > A-1001SRD-A

A-1001SRD-A

更新时间： 2022-02-26 15:00:09

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

A-1001SRD-A 数据手册

Release

PARALIGHTDCC

1.00 INCH SINGLE DIGIT DISPLAY

REV:A / 0

A-1001SRD-A B/W

2) Similarly, when a jig is used to solder the Display to PC board, take care as much as possible to

avoid steering the PIN (See Fig.2).

Fig.2

3) Repositioning after soldering should be avoided as much as possible. If inevitable, be sure to

preserve the soldering conditions with irons stated above: select a best-suited method that

assures the least stress to the Display.

4) PIN cutting after soldering should be performed only after the Display temperature has returned

to normal temperature.

—LED MOUNTING METHOD

1) When mounting the Display by using a case, as shown Fig.3, ensure that the mounting holds on

the PC board match the pitch of the PIN correctly-tolerance of dimensions of the respective

components including the Display should be taken into account especially when designing the

case, PC board, etc. to prevent pitch misalignment between the PIN and board holes, the

diameter of the board holes should be slightly larger than the size of the PIN. Alternatively, the

shape of the holes should be made oval. (See Fig.3)

Fig.3

DRAWING NO. : DS-11-07-0167

DATE : 2010-05-08

Page : 6

1...3 4 567 8 9 10

下载PDF

型号	品牌	描述	获取价格	数据表
A-1001UB-A	PARALIGHT	1.00 INCH SINGLE DIGIT DISPLAY	获取价格
A-1001Y	ETC	SINGLE DIGIT DISPLAY	获取价格
A1002	ETC	Desoldering Gun for HAKKO 474.475	获取价格
A1003	ETC	Desoldering Gun for HAKKO 474.475	获取价格
A10030-01	HAMAMATSU	Optical Components for Optical Measurement	获取价格
A10030-02	HAMAMATSU	Optical Components for Optical Measurement	获取价格