3M™ Pleated Foil Shielded Cable
.025" 30AWG Solid, TPE Primary, PVC Jacket
90101 Series
• Compatible with IDC mass termination connectors
• Functions with applications requiring standard
impedance of 100 Ω balanced (differential)
• Solid pleated copper foil provides flexibility and
35 db average shielding effectiveness
• CL2 rated, rugged design and high reliability for
peripheral applications
• See the Regulatory InformationAppendix (RIA) in
the “RoHS compliance” section of
www.3Mconnectors.com for compliance information
(RIAE1 & C1 apply)
Date Modified: September 3, 2013
TS-0285-D
Sheet 1 of 2
Physical
Jacket:
Material: Polyvinyl Chloride (PVC)
Color: Gray
Primary Material: Thermoplastic Elastomer (TPE)
Marking:
Standard:
(UL) CL2 75C 30AWG 3M NU C
AWM IIA/B 80C 150V FT1 EU <50V
Conductors: 30AWG [ 0.254 ] Tinned Solid Copper
Shielding: Solid, Pleated, Copper Foil
Electrical
Voltage Rating: USA: N.E.C. 725, CL2
Canada: 150V
EU: <50V
Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]
Unbalanced
Balanced
Characteristic Impedance:
53 Ω
104 Ω
Capacitance: 28.4 pF/ft [ 93.2 pF/m ]
Inductance: 0.08 μH/ft [ 0.26 μH/m ]
14.5 pF/ft [ 47.6 pF/m ]
0.16 μH/ft [ 0.52 μH/m ]
1.51 ns/ft [ 4.95 ns/m ]
67%
Propagation Delay: 1.52 ns/ft [ 4.99 ns/m ]
Velocity of Propagation: 67%
Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair with the shield floating.
Environmental
Temperature Rating: USA: CL2: 75°C
Canada: 80°C
Canada: FT1
Flammability Rating: USA: N.E.C. 725, CL2
UL File No.: E118773, Power Limited Circuit Cable: CL2
3M is a trademark of 3M Company.
For technical, sales or ordering information call
3
Interconnect Solutions
http://www.3Mconnectors.com
800-225-5373