Power entry modules without line filter
6200
https://www.schurter.com /PG05
IEC Appliance Inlet C14 with Fuseholder 1-pole, wired
Screw-on mounting
Snap-in version
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Characteristics
- All single elements are already wired
- Plug removal necessary for fuse-link replacement
- Suitable for use in equipment according to IEC/UL 62368-1
Screw-on version from front or rear side, snap-in version front side
- Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm
1-pole
Other versions on request
- Types for rivet mounting available upon request
- V-Lock notch standard
- Meets the requirements of IEC 60335-1 for appliances in unattended
use. This includes the enhanced requirements of glow wire tests acc.
to IEC 60695-2-11 or -12 &-13.
References
Alternative: version with line filter 5200
Alternative: Fuseholder 2-pole 6220
- Solder / Quick Connect
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10A / 250VAC; 50Hz
10A / 250VAC; 60Hz
> 2kVAC between L-N
> 2kVAC between L/N-PE
(1min/50Hz)
Appliance inlet/-outlet
Fuseholder
C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I
1-pole, Shocksafe category PC2 acc. to
IEC 60127-6, UL 498,
for fuse-links 5 x 20mm
5 x 20: 2W (1 pole)
Allowable Operation Tempe-
rature
IP-Protection
Protection against electric
shock
Terminal
-25°C to 70°C
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Solder / Quick Connect , tin-plated
Screw: max 6mm
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Panel Thickness S
Mounting screw torque max 0.5Nm
Snap-in: 1/1.5/2/2.5/3 mm
Material: Housing
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Connectors