5000W Transient Voltage Suppressor
5KP-G Series
Stand-off Voltage: 6.8V ~ 220V
Power Dissipation: 5000 Watts
RoHS Device
R-6
Features
-Glass passivated chip.
0.052(1.32)
0.048(1.22)
DIA.
-Low leakage.
1.0(25.4)
MIN.
-Uni and Bidirection unit.
-Excellent clamping capability.
-The plastic material has UL recognition 94V-0.
-Fast response time.
0.360(9.14)
0.340(8.64)
Mechanical Data
0.360(9.14)
0.340(8.64)
DIA.
-Case: Molded plastic R-6
-Polarity: By cathode band denotes uni-directional
device, none cathode band denotes bi-directional
device
1.0(25.4)
MIN.
-Weight: 2.1 grams
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derated current by 20%.
Symbol
Parameter
Value
Unit
Peak power dissipation with a 10/1000μs
waveform (Note 1)
PPP
W
5000
Peak pulse current with a 10/1000μs waveform
IPP
PD
W
W
A
See Next Table
(Note 1)
Power dissipation on infinite heatsink at TL=75°C
8.0
Peak forward surge current, 8.3ms single
half sine-wave unidirectional only (Note 2)
IFSM
500
Maximum instantaneous forward voltage at
100A for uni-directional devices only (Note 3)
3.5 / 5.0
VF
V
Operating junction and storage temperature
range
OC
TJ, TSTG
-55 to +150
NTOES:
(1) Non-repetitive current pulse, per fig.5 and derated above TA=25 OC per fig. 1.
(2) Measured on 8.3 ms single half sine wave of equivalent square wave,duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
REV:B
Page 1
QW-BTV08