4cpW10,000R/9016
cꢍaRacteRistics
The 4CPW10,000R/9016 is intended for use as a
pulse modulator or regulator for use with magne-
trons, crossed field amplifiers, TWTs, klystrons,
and other RF power sources. The inherent con-
stant current characteristic of this tetrode is well
suited for series switching of plasma discharge
devices, electron beam welding equipment , etc.
The rugged construction of this tube allows it to
be used under demanding vibration and shock
conditions. The holdoff voltage rating is 25 kVdc in
pulse modulator or regulator service, with a peak
anode current of 24 amperes.
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
10,000 Watts
250 Watts
75 Watts
--- MHz
4.5
Thoriated Tungsten
7.5 Volts
75 Amps
Grounded Cathode
115 pf
Current
Capacitance
Input
Output
20.0 pf
Feedthrough
Capacitance
Input
0.7 pf
---
--- pf
Output
--- pf
Feedthrough
Cooling
--- pf
Water and Forced Air
Coaxial
Base
Air Socket
SK-300A
---
Air Chimney
Boiler
---
Length
11.44 in; 29.06
4.66 in; 11.84
7.5 lb; 3.4
Diameter
Weight
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀMaxiMuMꢀRatingsꢀ
ꢀ
typicalꢀOpeRatiOn
ꢀ
ꢀ
ꢀ
cꢁꢂꢃꢃꢀofꢀꢀ
Oꢅꢆrꢂꢉꢇoꢊꢀ
ꢀ
tꢄꢅꢆꢀofꢀsꢆrvꢇꢈꢆꢀ
pꢁꢂꢉꢆꢀꢀ
pꢁꢂꢉꢆꢀ
pꢁꢂꢉꢆꢀ
sꢈrꢆꢆꢊꢀ
pꢁꢂꢉꢆꢀ
Drꢇvꢆꢀ
Oꢋꢉꢅꢋꢉꢀ
ꢀ
ꢀ
Voꢁꢉꢂꢌꢆꢀ cꢋrrꢆꢊꢉꢀ
Voꢁꢉꢂꢌꢆꢀꢀ Voꢁꢉꢂꢌꢆꢀ cꢋrrꢆꢊꢉꢀ ꢀpowꢆrꢀ powꢆrꢀ
(Voꢁꢉꢃ)ꢀ
25,000ꢀ
(amꢅꢃ)ꢀ
24.0ꢀ
(Voꢁꢉꢃ)ꢀ
(Voꢁꢉꢃ)ꢀ
(amꢅꢃ)ꢀ (Wꢂꢉꢉꢃ)ꢀ (kꢇꢁoWꢂꢉꢉꢃ)
ꢀ
---ꢀ
swꢇꢉꢈhꢀꢉꢋbꢆꢀorꢀꢅꢋꢁꢃꢆꢀmodꢋꢁꢂꢉorꢀ
20,000ꢀ
1,250ꢀ
20.0ꢀ ---ꢀ 370.0
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
Forꢀꢇꢊformꢂꢉꢇoꢊꢀon this and other CPI products, visit our website at:ꢀwww.ꢈꢅꢇꢇ.ꢈom,
or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303
telephone: 1(800) 414-8823. fax: (650) 592-9988 | email: powergrid@cpii.com