Surface Mount Fuses Datasheet
476 Series
NANO2® Fuse > 250V > Fast Acting
Product Characteristics
MIL-STD-202, Method 107 Test Condition B, 5 cycles,
-65°C to 125°C, 15 minutes @ each extreme
MIL-STD-202, Method 213Test Condition I: De-energized.
100G’s peak amplitude, sawtooth wave 6ms duration, 3
cycles XYZ+xyz = 18 shocks
Body: Ceramic
Cap: Silver Plated Brass/Sn Dipped
Silver Plated Brass/Gold Plated Brass
Body: Brand Logo, Current Rating
–55ºC to +125ºC
Thermal Shock
Materials
Mechanical
Shock
Product Marking
MIL-STD-202, Method 201: 0.03” amplitude, 10-55 Hz in 1
min. 2 hrs. each XYZ = 6hrs (10- 55 Hz)
Operating Temperature
Vibration
Moisture Sensitivity
Level
Level 1
Moisture
Resistance
MIL-STD-202, Method 106 10 cycles
Solderability
MIL-STD-202, Method 208
IEC 60127-4 (0.1Mohm Min)
Salt Spray
MIL-STD-202, Method 101 Test Condition B (48 hrs)
MIL-STD-202, Method 210, Test Condition B
Insulation Resistance
(after opening)
Resistance to
Soldering Heat (10 sec at 260°C)
Dimensions
Part Numbering System
mm(inches)
2.69 .25
(.106")
0476 015. M R SN
6.10 .20
(.240")
Series
Amp Code*
Refer to Amp Code column of
Electrical Characteristics Table
15
1.45
2.69 .25
(.106")
(.057")
Quantity Code
M = 1000 pieces
Packaging Code
1.96
(.077")
R = Tape and Reel
SN — Sn-dipped Caps
S — For 15A only - Gold Plated
Caps with 10kA@86VDC IR
3.15
(.124")
2.95
(.116")
6.86
(.270")
Recommended Pad Layout
Packaging
Quantity &
Packaging Code
Packaging Option
Packaging Specification
Quantity
Reel Size
12mmTape and Reel
EIA-RS-481-2 IEC 60286-3
1000
MR
N/A
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
© 2023 Littelfuse, Inc.
Specifications are subject to change without notice.
3
Revised: GD. 06/26/23