Circuit Protection
Product Specification
10
16
10D
METAL OXIDE VARISTORS
Reliability
Items
Standard
Test conditions / Methods
Specifications
Gradually applying the force specified and keeping the unit
fixed for 10±1 sec.
Tensile Strength
of Terminals
No visible damage
Terminal diameter (mm)
0.5<d≤0.8
Force (kg)
IEC60068-2-21
|ΔV1mA/V1mA |≤5%
1.0
2.0
4.0
0.8<d≤1.25
1.25<d
Hold specimen and apply the force specified below to each
lead. Bend the specimen to 90°, then return to the original
position. Repeat the procedure in the opposite direction.
Bending Strength
of Terminals
No visible damage
Terminal diameter (mm)
0.5<d≤0.8
Force (kg)
IEC60068-2-21
|ΔV1mA/V1mA |≤5%
0.5
1.0
2.0
0.8<d≤1.25
1.25<d
Frequency range: 10~55 Hz
Amplitude: 0.75mm or 98m/s2
Direction: 3 mutually perpendicular directions, 2hrs each.
No visible damage
|ΔV1mA/V1mA |≤5%
Vibration
IEC60068-2-6
IEC60068-2-20
At least 95% of terminal
electrode is covered by
new solder
Solder Temp: 245±5℃
Dipping Time: 2±0.5 sec
Solderability
Resistance to
Soldering Heat
High Temperature
Storage
Solder Temp: 260±5℃
Dipping Time: 10±1 sec
Ambient Temp: 125±2℃
Duration: 1000±24hrs
No visible damage
|ΔV1mA/V1mA |≤5%
No visible damage
|ΔV1mA/V1mA |≤5%
IEC60068-2-20
IEC60068-2-2
No visible damage
Ambient Temp: -40±2℃
Low Temperature
Storage
IEC60068-2-1
IEC60068-2-78
|ΔV1mA/V1mA |≤5%
Duration: 1000±24hrs
No visible damage
|ΔV1mA/V1mA|≤10%
Insulation
The test is divided into two groups .
Damp Heat,
Steady State
a. 40±2℃ , 90~95% RH for 1344±24hrs
b. 40±2℃ , 90~95% RH,at 10%VDC ,1344±24 hrs
Resistance≧100MΩ
MIL-STD-202
Method 108
Ambient Temp: 105±2℃
Duration: 1000±24hrs
High Temperature
Load
|ΔV1mA/V1mA|≤10%
Load: Max. Allowable Voltage In AC.
The conditions shown below shall be repeated 5 cycles
Step
Temperature (℃)
-40±3
Period (minutes)
1
2
3
4
30±3
5±3
No visible damage
IEC60068-2-14
IEC61051-1
Temperature Cycle
|ΔV1mA/V1mA |≤5%
Room temperature
125±3
30±3
5±3
Room temperature
8/20µS waveform,10 surge currents, unipolar, interval
30secs,amplitude corresponding to max. surge current
derating curves for 20µS.
8/20uS
No visible damage
△Vb(1mA)≦±10%
Surge Life
10/1000µS waveform,10 surge currents, unipolar, interval
2mins,amplitude corresponding to max. surge current derating
curves for 1000µS.
10/1000µS
Surge Life
No visible damage
IEC61051-1
IEC61051-1
|ΔV1mA/V1mA |≤10%
Metal balls method, 2500Vac 1 min.
Voltage Proof
No visible damage
www.yageo.com
May. 08, 2021 V.0