C B S 1 0 & 2 0 S e r i e s
CBS 10 and 20 Series Configuration
10 and 20 Series Specs
COVER
Sizes: .50” x .50” to 12” x 24” (.25” increments)
Shapes: Squares, rectangles and odd shapes in
.25” increments
Heights: .13” to 2.00”
HEIGHT
Mounting Pins: .50” or 1.00” spacing
Surface Mount: Available for all 10 and 20
series CBS
Std Material: .015” (,38) pre-tin plated steel
Cover Retention: 1.5 - 2.5 lb./linear inch
Shielding Effectiveness: up to 60 dB
PIN
WIDTH
.08’’
(2,03)
AVAILABLE HEIGHTS:
10 SERIES-.13” TO 2.0” (3,3 TO 50,8) 20 SERIES-.20” TO 2.0” (5,08 TO 50,8)
Recommended hole size: .050” (1,27)
Standard Options
•
•
•
•
•
Formed fence and cover - unassembled (F)
Assembled fence and cover (A)
Flat fence and formed cover (U)
Ventilation Patterns
Pre-tin plated Phos Bronze (P), Alloy 770 (N)
Ventilation holes (SV 15% or DV 30%)
DV PATTERN .156” HOLE
SV PATTERN .156” HOLE
Ordering a CBS is Easy
1. Select your style number - “21-CBS”
2. Choose standard options listed above -
“21-CBSFNSV”
3. Specify your width in .25” increments from
.50” to 12.00” - “21-CBSFNSV-2.5”
.250”
TYP
.500”
TYP
4. Specify your length in .25” increments from
.50” to 24.00” - “21-CBSFNSV-2.5x4.5”
5. Specify your height from board to inside
cover from .13” to 2.00”
Single density and double density ventilation holes available upon request.
SV/DV (Standard) = .156” dia. SV2 /DV2 (Alternate) = .08” dia.
“21-CBSFNSV-2.5x4.5x.225”
Mounting Hole Patterns (10 and 20 series)
20S-CBS Foot Pattern
.50” Pin Pattern
1.0” Pin Pattern
Pin pattern viewed from top of shield. Consult factory for pin patterns for your application
The Leading Edge in EMI Shielding Technology
5