ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Supply Voltage at VS1 and VS2
V
V
PWR
V
SUPDC
-0.3 to 27
40
Continuous
Transient (Load Dump)
V
SUPTR
VDD
Supply Voltage at VDD and VCC
Output Current at VDD
-0.3 to 5.5
Internally Limited
-0.3 to VDD+0.3
-0.3 to VDD+0.3
-0.3 to 7.0
V
A
I
DD
Logic Input Voltage at MOSI, SCLK, CS, IN, and TXD
Logic Output Voltage at MISO, INT, RST, and RXD
Input Voltage at E+ and E-
V
V
INLOG
V
V
OUTLOG
V
/V
V
E+ E-
I
/I
±20
mA
V
Input Current at E+ and E-
E+ E-
Output Voltage at OUT
V
-0.3 to VCC+0.33
±20
OUT
OUT
Output Current at OUT
I
mA
V
Input Voltage at L1 and L2
DC Input with a 33 kΩ Resistor
V
-18 to 40
±100
LXDC
Transient Input with External Component (per ISO7637 Specification) (See
Figure 4, page 6)
V
LXTR
Input/Output Voltage at LIN
DC Voltage
V
V
V
-18 to 40
BUSDC
Transient Input Voltage with specified External Component (per ISO7637
Specification) (See Figure 4, page 6)
V
-150 to 100
BUSTR
DC Output Voltage at HS1 and HS2
V
V
+ 0.3
VS2
HS+
Positive
Internally Clamped
-0.3 to V + 0.3
V
Negative
HS
-
DC Output Voltage at HS3
V
V
V
HS3
VS2
ESD Voltage, Human Body Model (1)
ESD1
V
GND Configured as Ground. TGND and AGND Configured as I/O Pins
LIN, L1, and L2
All Other Pins
±4000
±2000
ESD Voltage, Charge Device Model (1)
Corner Pins (Pins 1, 16, 17, and 32)
All other Pins (Pins 2–15 and 18–31)
ESD2
V
V
±750
±500
Notes
1. ESD1 testing is performed in accordance with the Human Body Model (CZAP =100 pF, RZAP = 1500 Ω), ESD2 testing is performed in
accordance with the Charge Device Model, Robotic (CZAP =4.0 pF).
33689
Analog Integrated Circuit Device Data
Freescale Semiconductor
5