Datasheet > 308391-1

308391-1

更新时间： 2022-02-26 12:52:39

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

308391-1 数据手册

Figure 5

3. Inspect the jaw closure surfaces, jaw bottoming surfaces, and jaw cam rollers for deposits of dirt or

other foreign particles. If necessary, wipe clean with a clean cloth. Re–lubricate the jaw cam rollers

according to Paragraph 5.3. Make sure the jaw cam rollers are not binding.

4. Pull one cowling pin and remove the retaining pin from the lower housing cover. The cover will swing

open. See Figure 6.

5. Remove the pivot pins.

6. Orient the jaws as described in the instruction sheet packaged with the jaw assembly (refer to Figure

5). Position the jaws in the tool housing ensuring that the jaw cam rollers are properly mated with the

tool cam and the pivot pin holes of the jaws and the tool housing are aligned. See Figure 6.

7. Insert the pivot pins.

8. Pivot the lower housing cover into the closed position, and re–install the retaining pin and cowling pin.

1. DISCONNECT the tool from the air supply.

2. Pull one cowling pin and remove the retaining pin from the lower housing cover. The cover will swing

open.

3. Remove the pivot pins, then remove the jaws.

1...4 5 678 9 10...17

下载PDF

型号	品牌	描述	获取价格	数据表
3084	NTE	Darlington Output Optocoupler, 1-Element, 6 PIN	获取价格
3084A	ETC	CABLE DEVICENT DROP 500FT	获取价格
3084A0021000	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格
3084AT5U1000	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格
3084AT5U2000	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格
3084AT5U500	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格