Datasheet > 308391-1

308391-1

更新时间： 2022-02-26 12:52:39

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

308391-1 数据手册

If the jaws close too slowly or not at all the control button is fully depressed, perform the following:

1. Make sure that the air pressure is regulated at 552 kPa [80 psi] minimum to 689 kpa [100 psi]

maximum.

2. With the control button fully depressed, insert the tip of a screw driver through the rear exhaust port

and into the slot at the rear of the air valve spool. See Figure 10.

3. Turn the screw driver COUNTER–CLOCKWISE until the jaws are fully closed. Stop turning the screw

driver as soon as the jaws are closed and when there is no evidence of air escaping through the exhaust

ports.

4. Cycle the tool a few times to ensure that the tool is functioning properly.

If jaws open too slowly or not at all when the control button is released, perform the following:

1. Make sure that the air pressure is regulated at 552 kPa [80 psi] minimum to 689 kpa [100 psi]

maximum.

2. With the control button fully depressed, insert the tip of a screw driver through the rear exhaust port

and into the slot at the rear of the air valve spool. See Figure 10.

3. Turn the screw driver CLOCKWISE until the jaws are fully open. Stop turning the screw driver as

soon as the jaws are open and when there is no evidence of air escaping through the exhaust ports.

4. Cycle the tool a few times to ensure that the tool is functioning properly.

Revisions to this customer manual include:

Updated document to corporate requirements

Removed obsolete Tool 68068–4

Removed obsolete jaw assemblies and added instruction sheet referenced to Figure 5

Added jaw position to Figure 6

Removed obsolete items or items related to obsolete tool from Figure 9

Added Paragraph 2.1

Changed “rear plug” to “piston” in Paragraph 8.1, Step 12 and Paragraph 8.2, Step 18

Added lubrication symbol to jaw cam rollers in Figure 7

Added ordering parts information and changed customer repair service information in Section 8

1...14 15 1617

下载PDF

型号	品牌	描述	获取价格	数据表
3084	NTE	Darlington Output Optocoupler, 1-Element, 6 PIN	获取价格
3084A	ETC	CABLE DEVICENT DROP 500FT	获取价格
3084A0021000	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格
3084AT5U1000	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格
3084AT5U2000	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格
3084AT5U500	ETC	22 and 24 AWG stranded tinned copper conductors, PVC insulation	获取价格