D I G I T R O N S E M I C O N D U C T O R S
2N6068, A, B-2N6075,A, B
SENSITIVE GATE TRIACS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
(1)
Repetitive peak off-state voltage
(TJ = 110°C)
2N6068, A, B
2N6069, A, B
2N6070, A, B
2N6071, A, B
2N6072, A, B
2N6073, A, B
2N6074, A, B
2N6075, A, B
25
50
100
200
300
400
500
600
VDRM
Volts
On-state current RMS (TC = 85°C)
IT(RMS)
ITSM
I2t
4.0
30
Amp
Amp
A2s
Peak surge current (one full cycle, 60Hz, TJ = -40 to 110°C)
Circuit fusing considerations (TJ = -40 to 110°C, t = 1.0 to 8.3ms)
Peak gate power
3.6
PGM
PG(AV)
VGM
TJ
10
Watts
Watt
Volts
°C
Average gate power
0.5
Peak gate voltage
5.0
Operating junction temperature
-40 to 110
-40 to 150
8.0
Storage temperature
Tstg
-
°C
(2)
Mounting torque (6-32) screw
In. lb.
THERMAL CHARACTERISTICS
Characteristic
Symbol
RӨJC
Max
3.5
60
Unit
°C/W
°C/W
Thermal resistance, junction to case
Thermal resistance, case to ambient
RӨCA
NOTE 1: Ratings apply for gate open conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking
voltage.
NOTE 2: Torque rating applies with use of torque washer. Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Main terminal 2 and heatsink contact
pad are common.
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
2.0
Unit
Peak blocking current (either direction)
IDRM
mA
Rated VDRM @ TJ = 110°C, gate open
-
-
-
-
On-state voltage (either direction)
VTM
Volts
Volts
ITM = 6.0A peak
2.0
Peak gate trigger voltage
Main terminal voltage = 12Vdc, RL = 100ohms, TJ = -40°C
MT2(+), G(+):MT2(-), G(-) All types
-
-
1.4
1.4
2.5
2.5
MT2(+), G(-): MT2(-), G(+) 2N6068A, B thru 2N6075A, B
Main terminal voltage = rated VDRM, RL = 10k ohms, TJ = 110°C
MT2(+), G(+):MT2(-), G(-) All types
VGTM
0.2
0.2
-
-
-
-
MT2(+), G(-): MT2(-), G(+) 2N6068A, B thru 2N6075A, B
Holding current (either direction)
Main terminal voltage = 12Vdc, gate open, TJ = -40°C
Initiating current = 1.0Adc
2N6068 thru 2N6075
-
-
-
-
70
30
IH
mA
2N6068A, B thru 2N6075A, B
Initiating current = 1.0Adc, TJ = 25°C
2N6068 thru 2N6075
-
-
-
-
30
15
2N6068A, B thru 2N6075A, B
phone +1.908.245-7200
fax +1.908.245-0555
sales@digitroncorp.com
www.digitroncorp.com
144 Market Street
Kenilworth NJ 07033 USA
Rev. 20130131
5秒后页面跳转
深入解析CS8416引脚说明、参数、技术特点
TPA3116D2功放芯片参数详解、引脚说明
移位寄存器74HC165引脚说明、驱动程序示例解读
深入解析AD9833：DDS频率合成器的卓越性能与广泛应用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
