Datasheet > 2100T

2100T

更新时间： 2024-02-28 13:53:39

品牌	Logo	应用领域
SYSTEMSENSOR		光电
页数	文件大小	规格书
4页	240K
描述
Photoelectronic Smoke Detectors

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

2100T 技术参数

生命周期：	Contact Manufacturer	Reach Compliance Code：	compliant
风险等级：	5.38	连接器类型：	BOARD CONNECTOR
DIN 符合性：	NO	IEC 符合性：	NO
MIL 符合性：	NO	Base Number Matches：	1

2100T 数据手册

INSTALLATION AND MAINTENANCE INSTRUCTIONS

A Division of Pittway

3825 Ohio Avenue, St. Charles, Illinois 60174

1-800-SENSOR2, FAX: 630-377-6495

2100 and 2100T Photoelectronic

Smoke Detectors

Specifications

Diameter:

Height (including mounting bracket):

Weight:

5.5 inches (140 mm)

1.7 inches (43 mm)

5.3 oz. (150 g)

Operating Temperature Range:

Model 2100:

Model 2100T:

32° to 120°F (0° to 50° C)

32° to 100°F (0° to 39°C)

Operating Humidity Range:

Latching Alarm:

10% to 93% Relative Humidity, Noncondensing

Reset by momentary power interruption

Heat Sensor (Model 2100T only):

Electrical Ratings

135°F Fixed Temperature Electronic Thermistor

System Voltage

Nominal:

Minimum:

Maximum:

12 or 24 VDC

8.5 VDC

35 VDC

Maximum Ripple Voltage:

Start-up Capacitance:

Standby Current:

30% of nom. Voltage (peak to peak)

0.02 µF maximum

50 µA maximum

Alarm Ratings:

4.2 VDC minimum at 10 mA.

6.6 VDC maximum at 100 mA.

(Alarm current must be limited to 100 mA maximum by the control panel. If used, the RA400Z Remote Annunciator oper-

ates within the specified detector alarm currents.)

Reset Voltage:

Reset Time:

2.5 VDC minimum

0.3 seconds maximum

Start-up Time:

30 seconds maximum (after 60 second reset)

Before Installing

Installation of these detectors is simplified by the use of a

Please thoroughly read System Sensor manual I56-407, mounting bracket and a plug-in screw terminal block that

Guide for Proper Use of System Smoke Detectors, which pro- can be prewired to the system, allowing the detector to be

vides detailed information on detector spacing, placement, easily installed or removed for cleaning. The detector’s sen-

zoning, wiring, and special applications. Copies of this sitivity can be tested in place using the MOD400R Test

manual are available at no charge from System Sensor.

Module. An LED on the detector provides a local visual in-

dication of the detector’s status. If power is applied to the

NOTICE: This manual should be left with the owner/user detector, and it is functioning normally in standby, the sta-

of this equipment.

tus LED blinks every ten seconds. The LED also latches on

in alarm.

IMPORTANT: This detector must be tested and maintained

regularly following NFPA 72 requirements. The detector Models 2100 and 2100T feature a visual indication that

should be cleaned at least once a year.

maintenance is required – if the sensing chamber drifts out

of its sensitivity limits, the LED ceases to blink.

General Description

Model 2100 is a 2-wire photoelectronic smoke detector that The detectors also include an output that allows an op-

uses a state-of-the-art optical sensing chamber. This detec- tional Model RA400Z Remote Annunciator to be connected.

tor is designed to provide open area protection and to be

used with compatible UL-listed panels only. Model 2100T

features a restorable, built-in, fixed-temperature (135° F)

thermal detector.

D200-54-00

I56-710-05

12 3 4

中文翻译

下载PDF

与2100T相关器件

型号	品牌	获取价格	描述	数据表
2100TD	SYSTEMSENSOR	获取价格	Photoelectronic Smoke Detectors
2100TR	SYSTEMSENSOR	获取价格	Photoelectronic Smoke Detector with Fixed Heat
2100TS	SYSTEMSENSOR	获取价格	Smoke Detectors
2101	FRONTIER	获取价格	Insert Molded Coil
210-1000-FT10W	RCD	获取价格	Fixed Resistor, Wire Wound, 2W, 100ohm, 40V, 1% +/-Tol, 10ppm/Cel,
210-1002-FB10Q	RCD	获取价格	Fixed Resistor, Wire Wound, 2W, 10000ohm, 40V, 1% +/-Tol, 10ppm/Cel,
210-1002-FB10W	RCD	获取价格	Fixed Resistor, Wire Wound, 2W, 10000ohm, 40V, 1% +/-Tol, 10ppm/Cel,
210-1002-FBQ	RCD	获取价格	Fixed Resistor, Wire Wound, 2W, 10000ohm, 40V, 1% +/-Tol, 20ppm/Cel,
210-100-HB5	RCD	获取价格	Fixed Resistor, Wire Wound, 2W, 10ohm, 40V, 3% +/-Tol, 5ppm/Cel,
210-100-HT5	RCD	获取价格	Fixed Resistor, Wire Wound, 2W, 10ohm, 40V, 3% +/-Tol, 5ppm/Cel,

与2100T相关文章

BSS138LT3G：一款高效能N沟道MOSFET的全面解析
2024-07-04

17
解读EGP10B二极管资料手册：产品特性、参数分析
2024-07-04

16
RT9164AGG手册资料详解：引脚信息、设计指南
2024-07-04

14
2SA1037KPT资料详解：产品特性、电气参数、设计指南
2024-07-04

16

产品中心

服务支持

精选活动

关于我们

帮助中心

2100T

2100T 技术参数

2100T 数据手册

与2100T相关器件

与2100T相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2100T

2100T 技术参数

2100T 数据手册

与2100T相关器件

与2100T相关文章

您还可以找

您在本页遇到什么问题？