1N6309US thru 1N6355US
VOIDLESS-HERMETICALLY-SEALED
Surface Mount 500 mW Glass Zener Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This Zener Voltage Regulator series is military qualified to MIL-PRF-
19500/533 and is ideal for high-reliability applications where a failure
cannot be tolerated. These industry-recognized 0.5 Watt Zener Voltage
Regulators are hermetically sealed with voidless-glass construction using
an internal metallurgical bond. It includes Zener selections from 2.4 to 200
volts in standard 5% tolerances as well as tighter tolerances identified by
different suffix letters on the part number. They are also available in axial-
leaded packages (see separate data sheet for 1N6309 thru 1N6355).
Microsemi also offers numerous other Zener products to meet higher and
lower power ratings in both thru-hole and surface mount packages.
“B” PACKAGE
(or “D-5D”)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
Popular JEDEC registered series
Voidless hermetically sealed glass package
Triple-layer passivation
Internal “Category I” Metallurgical bonds for 1N6320
thru 1N6355 and “Category III” for 1N6309 thru
1N6319
•
Regulates voltage over a broad operating current
and temperature range
•
•
Extensive selection from 2.4 to 200 V
Standard voltage tolerances are plus/minus 5% with
no suffix
•
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
Extremely robust construction
•
•
•
JAN, JANTX, JANTXV, and JANS available per MIL-
PRF-19500/533 for 1N6309US to 1N6336US
•
•
•
JANS types available per MIL-S-19500/533 for
1N6320US to 1N6336US.
Nonsensitive to ESD per MIL-STD-750 Method 1020
Inherently radiation hard as described in Microsemi
Axial-leaded equivalents also available (see separate
MicroNote 050
data sheet for 1N6309 thru 1N6355)
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
•
•
•
Operating Temperature: -65oC to +175oC
Storage Temperature: -65oC to +175oC
Power Dissipation: 0.5 Watts @ TEC = 150oC
Thermal Resistance: 50oC/W junction to End Cap
Thermal Impedance: 15oC/W at 10 ms
Forward Voltage: 1.4 V at 1.0 A
•
CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
•
TERMINATIONS: End caps are Tin/Lead (Sn/Pb)
over Silver
MARKING: None
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-481-B
Weight: 84 mg
•
•
•
•
Copyright 2005
Microsemi
Page 1
2-02-2005 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503