15ACBE_4 series
15W - Single/Dual Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
15 Watt
Universal input: 85~264VAC,
100-370VDC
Output over-current,
over-voltage protection
EMC performance meets
CISPR32 / EN55032 CLASS B
PCB, Chassis and DIN rail
mounting
The 15ACBE_4 series is a compact size power converter offered by
GAPTEC. It features universal AC input and at the same time accepts DC
input voltage, low power consumption, high efficiency, high reliability.
It offers good EMC performance compliant to IEC62368 and CISPR32/
EN55032 and the safety certifications to UL/IEC62368 and EN62368
standards. The converters are widely used in industrial and office appli-
cations. For extremely harsh EMC environment, we recommend using
the application circuit shown in this datasheet.
Regulated output, low ripple
and noise
High efficiency up to 83%
Plastic case, meets UL94V-0
Short circuit protection (SCP)
IEC/UL/EN62368 approved
UL-62368-1 (E347551)
Input specifications
Input voltage range
Input frequency
Input current
Output specifications
85~264VAC, 100~370VDC
47~63Hz
Voltage accuracy
3.3V output: 3%
Others: 2%
Line regulation
Load regulation
0.5%
1%
115VAC
230VAC
• 0.22A (typ)
• 0.37A (typ)
Inrush current
115VAC
• 16A (typ)
• 20A (typ)
230VAC
• 30A (typ)
• 30A (typ)
Minimum load
• Single output models
• Dual output models
• Single
• Dual
• 0%
• 10%
Hot plug
Unavailable
• 2A/250V
Ripple & Noise* (p-p)
20MHz Bandwidth:
50mV (typ), 100mV (max)
Recommended External
Input Fuse
• Slow-Blow
Short circuit protection
Over current protection
Hiccups, continuous, self-recovery
≥150% IO, self recovery
Example:
15ACBE_12S4
Output over-voltage protection
• 3.3/5VDC models
• 9VDC models
• 12/15VDC models
• 15VDC models (dual)
• 24VDC models
• ≤7.5VDC
• ≤12VDC
• ≤20VDC
• ≤22VDC
• ≤30VDC
15 = 15 Watt; AC = AC-DC; B = series; E = cost effective; 12Vout;
S = single output; 4 = 4kVAC isolation
Hold-up time
Note:
• Single output models
• Dual output models
Vin=115VAC: 10ms / Vin=230VAC: 60ms
Vin=115VAC: 8ms / Vin=230VAC: 50ms
1. Ripple and Noise are measured by the method of parallel lines.
2. Unless otherwise specified, all specifications are measured at rated input
voltage and rated output load, TA = 25°C, humidity < 75%.
Temperature coefficient
0.02%/°C
* The “parallel cable” method is used for Ripple and noise test.
Approval
Model*
Output Power
[W]
Output Voltage
[V]
Output Current
[mA]
Capacitive Load
[µF, max]
Efficiency
[%, typ]
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
-
15ACBE_03S4
15ACBE_05S4
15ACBE_09S4
15ACBE_12S4
15ACBE_15S4
15ACBE_24S4
15ACBE_05D4
15ACBE_12D4
15ACBE_15D4
9.9
14
15
15
15
15
15
15
15
3.3V
5V
3000mA
2800mA
1600mA
1250mA
1000mA
625mA
40000
20000
5800
5200
4500
1000
73
76
78
80
80
83
76
80
81
9V
12V
15V
24V
5V
1500mA
650mA
500mA
12800
2600
2400
-
12V
15V
-
* Add suffix CM for Chassis mounting with screw terminals (f.ex. 15ACBE_03S4CM) or DM for Din rail mounting (f.ex. 15ACBE_03S4DM).
Page 1 of 6
15ACBE_4 – Rev. 2020-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com