IMX7/IMS7 DC-DC Series Data Sheet
7-Watt DC-DC Converters
®
Features
• RoHS lead-free-solder and lead-solder-exempted
products are available.
• Input voltage ranges up to 150 VDC
• 1 or 2 isolated outputs up to 48 V
• 1200 to 2000 VAC I/O electric strength test
• Extremely wide input voltage ranges
• Immunity according to IEC/EN 61000-4-2, -3, -4, -5, -6
• High efficiency (typ. 84%)
• Input undervoltage lockout
• Inhibit input, adjustable output voltages
• Flex power: flexible load distribution on outputs
• Outputs no-load, overload, and short-circuit proof
• High reliability and no derating
• Operating ambient temperature –40 to +85 °C
• Thermal protection
• Supplementary insulation
10.5
0.42"
• 2” × 1” case with 10.5 mm profile
25.4
1.0"
50.8
2.0"
Safety according to IEC/EN 60950-1 and UL 60950-1
1
1 70/110IMX7 models
Description
The IMX7/IMS7 Series of board-mountable 7 Watt DC-DC
converters have been designed according to the latest industry
requirements and standards. The converters are particularly
suitable for use in mobile or stationary applications in
transport, railways, industry, or telecom, where variable input
voltages or high transient voltages are prevalent.
60 V. The converters have been approved by TÜV and UL. In
addition, 70IMX7 and 110IMX7 models are CE-marked.
The circuitry is comprised of integral planar magnetics. All
components are automatically assembled and securely
soldered onto a single PCB without any wire connections.
Magnetic feedback ensures maximum reliability and
repeatability in the control loop over all operating conditions.
Careful considerations of possible thermal stresses ensure the
absence of hot spots, providing long life in environments,
where temperature cycles are a reality. The thermal design
allows operation at full load up to an ambient temperature of
85 °C in free air without using any potting material. For
extremely high vibration environments the case has holes for
screw mounting.
Covering a total input voltage range from 8.4 V up to 150 V with
six different types, the converters are available with single and
electrically-isolated double outputs from 3.3 up to 48 V with
flexible load distribution on double outputs. A shutdown input
allows remote on/off.
Features include efficient input and output filtering with good
transient and surge protection, low output ripple and noise,
consistently high efficiency over the entire input voltage range,
and high reliability as well as excellent dynamic response to
load and line changes.
The converters provide supplementary insulation with SELV
outputs as for instances required in battery-supported
systems, where the bus voltage may exceed the SELV limit of
Several options, such as open-frame, provide a high level of
application-specific engineering and design-in flexibility.
Table of Contents
Page
Page
Description ............................................................................. 1
Model Selection ..................................................................... 2
Functional Description ........................................................... 3
Electrical Input Data ............................................................... 4
Electrical Output Data ............................................................ 7
Auxiliary Functions ................................................................. 9
Electromagnetic Compatibility (EMC) .................................. 11
Immunity to Environmental Conditions ................................ 12
Mechanical Data .................................................................. 13
Safety and Installation Instructions ...................................... 13
Description of Options ......................................................... 14
EC Declaration of Conformity .............................................. 15
BCD20007 Rev AB
Page 1 of 15
www.power-one.com