Datasheet > 105-433NBF

105-433NBF

更新时间： 2022-12-14 15:11:43

品牌	Logo	应用领域
RFSOLUTIONS		解码器遥控
页数	文件大小	规格书
4页	63K
描述
REMOTE RECEIVER DECODERS

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

105-433NBF 数据手册

‘105’ SERIES REMOTE RECEIVER DECODERS

Low Battery Output

The low battery feature informs the user that the Tx encoder used has a low voltage battery.

The LOW BATT channel operates if the Rx decoder has received a transmitted signal with low voltage signal

present. This will continue to operate until a transmitted signal without the low voltage signal has been

received.

NOTE: The LOW BATT relay is NOT fitted as standard, a relay of type BT47W/6 or equivalent can be used.

Expanding the system to 15 Relay outputs

The EX115C16A unit is available to connect directly to the ‘105’ Series Decoder providing 15 momentary relay

outputs. For further information please see Datasheet DS115.

Learning A New Transmitter Encoder

1. Press and release the programming switch (SW1)

2. Note that the Learn LED will illuminate

3. Depress and release the transmitter once, LED on the decoder will extinguish

4. Depress and release the transmitter again, LED on the decoder will flash

5. After the LED has stopped flashing the transmitter has been successfully taught to the decoder

6. This transmitter will now operate the system

Golden Transmitter: A special ‘golden transmitter’ encoder is available which when operated, causes the

same function as the user pressing the ‘Learn Switch’ This enables ‘remote Learning’ (for applications where

the ‘105’ decoder is inaccessible. For further information please contact our sales dept.

Erasing Existing Tx Encoder

1. To completely erase the Tx encoders, press SW1 on the Rx decoder for 10 seconds.

2. The learn LED will turn off after the 10 seconds to indicate the Tx encoder(s) have been erased

NOTE: You cannot erase individual Tx encoders

**Range

Please note that all radio systems are dependant on a radio signal being received through airspace.

The range quoted is the optimal in direct line of sight without obstacles and in good atmospheric conditions.

Range is affected by many things, e.g. local environmental conditions, atmospheric conditions, interference

from other radio transmitters.

In very worse case applications the range quoted may be reduced to 30% of the optimal range stated.

Technical Specifications

Dimensions: Enclosure: 190 x 120 x 60 mm (PCB: 174 x 106mm)

Storage Temperature; -10 to +70^oCelsius.

Electrical Characteristics

Supply Voltage

Supply Current: Quiescent

Time from Encoder Switch depressed to Decoder

output change

Operating Temperature; 0 to +55^oCelsius.

Min

Typical

Max

30.0

Units

11.0

12.0

100

300

mSecs

Time from Encoder Switch release to Decoder output

change

mSecs

All Relays operating

Relay Rating* (240Vac) RLY1-4

Low Battery Relay Rating (RLY9)

400

2.5

A @12Vdc

*The relay contacts in this unit are for functional use only and must not be used for isolation purposes

DS105-6 April ‘05

Page 3

1 234

下载PDF

与105-433NBF相关器件

型号	品牌	描述	获取价格	数据表
1054390005	MOLEX	Connector Accessory, Clip Item, Stainless Steel,	获取价格
1054431101	MOLEX	WTRPRF MICRO USB TOP MNT FLNGLS	获取价格
105443-1101	MOLEX	Telecom and Datacom Connector, 5 Contact(s), Female, Right Angle, Surface Mount Terminal,	获取价格
1054460000	WEIDMULLER	Component Carriers and Housings	获取价格
105450-0101	MOLEX	USB Connector, 24 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle	获取价格
1054550101	MOLEX	USB Connector,	获取价格