S Series
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Optional Customer Part Number
Print specification, etc. if required
L
W
Date Code
Resistance
01
10
VFR
XXXX
S102C
XXXXXX
100R01
0.01 %
Value Code
Year Week
H
Tolerance
ST1)
SW
LL
Model Number
LS
Lead Material #22 AWG
Round Solder Coated Copper
(Pb - free coating available)
Note
1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations.
2. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board.
TABLE 2 - MODEL SELECTION
AMBIENT
TIGHTEST
TOLERANCE
VS. LOWEST
RESISTANCE
VALUE
DIMENSIONS
mm
POWER RATING
RESISTANCE MAXIMUM
AVERAGE
WEIGHT
IN GRAMS
MODEL
NUMBER
RANGE
WORKING
VOLTAGE
at
at
F (1)
(INCHES)
()
INCHES
+ 70 °C + 125 °C
0.6 W
0.3 W
0.2 W
W: 0.105 ± 0.010
L: 0.300 ± 0.010
H: 0.326 ± 0.010
ST: 0.010 min.
SW: 0.040 ± 0.005 1.02 ± 0.13
LL: 1.000 ± 0.125
LS: 0.150 ± 0.005
2.67 ± 0.25
7.62 ± 0.25
8.28 ± 0.25
0.254 min.
S102C
1 to 150K
1 to 100K
1 to 500K
1 to 300K
1 to 750K
1 to 500K
0.5 to 1M
0.5 to 600K
(S102J) (2)
up to 100K
0.4 W
300
350
350
500
0.6
1.4
1.9
4.0
S102K
(S102L) (2)
over 100K
25.4 ± 3.18
3.81 ± 0.13
1.0 W
0.5 W
0.3 W
W: 0.160 max.
L: 0.575 max.
H: 0.413 max.
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125
LS: 0.400 ± 0.020 10.16 ± 0.51
4.06 max.
14.61 max.
10.49 max.
(0.138)
(0.565)
(0.413)
S104D
(S104F) (1)
up to 200K
0.6 W
0.005 %/50
0.01 %/25
0.02 %/12
0.05 %/5
0.1 %/2
0.50 %/1
1 %/0.5
S104K
over 200K
25.4 ± 3.18
1.5 W 0.75 W
up to 300K
W: 0.160 max.
L: 0.820 max.
H: 0.413 max.
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125
LS: 0.650 ± 0.020 16.51 ± 0.51 (0.7 ± 0.05)
4.06 max.
20.83 max.
10.49 max.
(0.138)
(0.890)
(0.413)
S105D
(S105F) (1)
0.8 W
0.4 W
S105K
S106D
S106K
over 300K
25.4 ± 3.18
2.0 W
1.0 W
1.0 W
W: 0.260 max.
L: 1.200 max.
H: 0.413 max.
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
6.60 max.
30.48 max.
10.49 max.
up to 400K
0.5 W
over 400K
LL: 1.000 ± 0.125
25.4 ± 3.18
LS: 0.900 ± 0.020 22.86 ± 0.51
Notes
(1)
(2)
S104F and S105F have different package dimensions (see the third column of dimensions). All other specifications are the same.
0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.
www.vishayfoilresistors.com
2
For any questions, contact
foil@vpgsensors.com
Document Number: 63001
Revision: 02-Mar-15