Document 568-1
Shielded Power Inductors
–
XPL7030
• Large terminations for excellent thermal management
• Soft saturation makes them ideal for VRM/VRD applications.
• XPL7030-102 specified by NSC in AN-1900 as L1
• XPL7030-682 specified by STMicro for the LED7707
Designer’s Kit C430 contains 3 each of all values
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight 0.74 g
Core and winding loss See www.coilcraft.com/coreloss
Ambient temperature –40°C to +125°C. The part can be operated
without damage as long as the part (ambient temperature plus
temperature rise due to self heating) does not exceed +165°C
Storage temperature Component: –40°C to +165°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR(mOhms)3
typ max
1.94 2.13
Isat(A)5
Irms(A)6
Inductance2
±20%(µH)
SRF typ4
(MHz)
Partnumber1
10% drop
20% drop
20°Crise
40°Crise
XPL7030-131ML_
XPL7030-281ML_
XPL7030-471ML_
XPL7030-701ML_
XPL7030-102ML_
0.13
0.28
0.47
0.70
1.0
241
137
83
64
50
40
28
22
20
57
44
34
32
29
23.8
18.6
16.6
13.5
12.0
31.3
24.6
21.6
17.6
16.4
3.05
4.18
5.40
6.70
3.36
4.59
5.94
7.37
19.0
XPL7030-122ML_
XPL7030-152ML_
XPL7030-182ML_
XPL7030-222ML_
XPL7030-272ML_
1.2
1.5
1.8
2.2
2.7
10.50
12.10
17.20
19.31
20.66
11.55
13.31
18.92
21.24
22.72
43
40
31
29
26
14.3
13.2
10.6
10.5
9.8
22.2
20.2
16.6
16.0
14.5
10.1
9.2
7.5
7.1
6.5
13.9
12.3
10.0
9.7
8.8
XPL7030-332ML_
XPL7030-472ML_
XPL7030-682ML_
XPL7030-822ML_
XPL7030-103ML_
3.3
4.7
6.8
8.2
10
25.15
40.10
58.50
62.20
88.30
27.66
44.11
64.35
68.42
97.13
22
16
13
12
11
9.0
6.8
5.8
5.2
4.4
14.0
10.5
9.4
8.2
7.2
5.8
4.8
4.0
3.8
3.2
8.5
6.4
5.2
5.0
4.4
XPL7030-223ML_
22
191.0
210.0
7.3
3.0
4.7
2.1
2.8
1. When ordering, please specify packaging code:
XPL7030-103MLC
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
Temperature rise is highly dependent
on many factors including pcb land
pattern, trace size, and proximity to
other components. Therefore
temperature rise should be verified
in application conditions.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not
stocked (1500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document568-1 Revised10/15/09
© Coilcraft, Inc. 2009