Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1048-1
Shielded Power Inductors
–
XFL4030
• High current – up to 5.2 A
• Very low DCR – as low as 3.6 mOhms
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
Core material Composite
Environmental RoHS compliant, halogen free
Terminations Tin-silver over copper. Other terminations available at
additional cost.
Weight 0.25 – 0.27 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
DCR (mOhms)3
Isat (A)5
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Part number1
typ
max
120 drop ±20 drop 320 drop
XFL4030-471ME_
XFL4030-102ME_
XFL4030-202ME_
XFL4030-302ME_
XFL4030-472ME_
0.47
1.0
2.0
3.0
4.7
3.6
5.5
9.5
17.0
25.0
4.4
6.6
11.5
20.5
30.0
110
67
46
39
34
4.5
3.6
2.5
1.8
1.7
4.9
3.9
2.8
2.1
2.0
5.2
4.1
3.0
2.2
2.1
14.0
11.0
7.80
6.10
5.70
18.0
14.5
11.8
8.00
7.50
1. When ordering, please specify packaging code:
XFL4232-47±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
(2000 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1048-1 Revised 03/19/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg