XC9206 / 9207/ 9208 Series
PWM, PWM/PFM Switchable Step-Down DC/DC Converters with Driver Transistor Built-In
September 17, 2003 Ver. 2
! P-Channel Driver Transistor Built-In
" APPLICATIONS
! Input Voltage Range
: 1.8V ~ 6.0V (XC9206/XC9207)
# Mobile phones (PDC, GSM, CDMA, IMT2000 etc.)
# PDA, Portable communication modem
# Portable game
: 2.0V ~ 6.0V (XC9208)
: 0.9V ~ 4.0V
! Output Voltage Range
! Oscillation Frequency
! Output Current
: 300kHz, 600kHz, 1.2MHz
: 500mA
# Camera, Digital camera, Camcorder
# Cordless phone
! Maximum Duty Ratio
! Small Package
: 100%
# Note book computer
: SOT-25
! PWM/PFM Switching Control (XC9207 / XC9208)
! Ceramic Capacitor Compatible
" GENERAL DESCRIPTION
" FEATURES
The XC9206/9207/9208 series is a group of DC/DC converters with a
built-in 0.4Ω P-channel driver transistor, offered in a SOT-25
package. The ICs are designed to provide high efficiencies and a
stable power supply with an output current of 500mA using only a
coil, a diode and two ceramic capacitors connected externally.
Minimum operating voltage of the XC9206/9207 is 1.8V and 2.0V for
XC9208. Output voltage is internally programmable in a range from
0.9V to 4.0V in increments of 100mV (accuracy: ±2.0%).
Oscillation frequency is selectable from 300kHz, 600kHz and 1.2MHz
so that the frequency best suited to your particular application can be
selected.
P ch driver Tr. Built-in
ON resistance 0.4Ω
Output Voltage Range
Oscillation Frequency
0.9V ~ 4.0V (100mV steps)
Fixed output voltage accuracy ±2%
300kHz, 600kHz, 1.2MHz
Fixed oscillation frequency
accuracy ±15%
Stand-by function
Istb = 1µA (MAX.)
Current Limiter Circuit built-in 600mA
Small Package
SOT-25
Each series features different operation modes:
PWM control (XC9206 series), automatic PWM/PFM switching
control (XC9207 series) and manual PWM/PFM switching control
(XC9208 series). The series gives fast transient response, low ripple
and high efficiency over the full range of load (from light load to high
output current conditions). The soft start and current control
functions are internally optimized. During stand-by, all circuits are
shutdown to reduce current consumption to as low as 1.0µA or less.
With the built-in U.V.L.O. (Under Voltage Lock Out) function, the
internal P-channel driver transistor is forced OFF when input voltage
becomes 1.4V or lower.
Soft start circuit built-in
" TYPICAL APPLICATION CIRCUIT
" TYPICAL PERFORMANCE CHARACTERISTICS
CE/MODE
XC9208A18C
VOUT=1.8V (Oscillation Frequency 1.2MHz)
VOUT
MODE
CE/
3
4
5
CIN:4.7µF,CL:10µF, L:4.7µH(CDRH3D16),
VSS
Lx
SD:CRS02, Topr=25OC
2
1
VOUT
100
90
80
70
60
50
40
30
20
10
0
L
PWM/PFM
Switching Control
VIN
(500mA)
VIN
VIN=2.4V
CL
(ceramic)
CIN
(ceramic)
SD
3.6V
4.2V
PWM
Control
0.1
1
10
100
1000
Output Current IOUT (mA)
Semiconductor Ltd.
Data Sheet
1