Taping specifications
There shall be the portion having no product in both the head and the end of taping, and there shall be
the cover tape in the head of taping.
Label Marking
The label specified as follows shall be put on the side of reel.
(1) Part No
(2) Quantity
(3) Lot No
* Part No. And Quantity shall be marked on outer packaging.
Quantity of products in the taping package
(1)Standard quantity:3000pcs/Reel
(2)Shipping quantity is a multiple of standard quantity.
Precautions for Handling
Precaution for handling of substrate
Do not exceed to bend the board after soldering this product extremely. (reference examples)
•
•
Mounting place must be as far as possible from the position, which is close to the break line of
board, or on the line of large holes of board.
Do not bend extremely the board, in mounting another components.
If necessary, use back-up pin (support pin) to prevent from bending extremely.
•
Do not break the board by hand. We recommend to use the machine or the jig to break it.
Precaution for soldering
Note that this product will be easily damaged by rapid heating, rapid cooling or local heating.
Do not give heat shock over 100C in the process of soldering. We recommend to take preheating and
gradual cooling.
Recommendable reflow soldering
Page 7 of 8
ASC_WQPH252012 Series
May.2023