WL50S Stainless Steel High-Intensity Spot
Light - PWM Dimmable
Datasheet
Chemically Resistant LED work lighting
•
Intensity can be controlled from 0 to 100% using Pulse Width Modulation (PWM) on
an input control wire
•
•
•
•
•
•
•
Three lens options, depending on model, to vary spot size
Illuminates a large area with an even pattern of light and no shadows
12 to 30 V dc operation
56 mm (2.2 in) diameter with flat profile and 30 mm (1.2 in) mounting base
®
Rugged, Viton o-ring sealed housing rated to IP69K
Chemically resistant 316 stainless steel housing for use in harsh environments
FDA grade silicone gasket
Use with the LC65 Dimmer Module. For more information, refer to the LC65 LED
Dimmer Module datasheet, p/n 177086.
Lux
Lens Angle
Model
LED Color
Window Material
Lumens
Connection
(see Beam
Patterns on
page 2)
0.5 m
1 m
WL50SWSSL5PWMQ
WL50SWSSGL5PWMQ
Polycarbonate
Glass
±5°
295
13780
3445
small, more
focused spot
5-pin Euro-style integral QD
connector (use with a 4-
wire or 5-wire mating
cordset, only 3 wires used
for connection)
White,
WL50SWSSL11PWMQ
WL50SWSSGL11PWMQ
Polycarbonate
Glass
±11°
285
270
5460
2000
1365
500
5000–8300 K
larger spot
±20°
WL50SWSSL20PWMQ
WL50SWSSGL20PWMQ
Polycarbonate
Glass
largest spot
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Original Document
179497 Rev. A
8 April 2014
179497