WL50S High-Intensity Work Spot Light
Datasheet
General-purpose LED work lighting
To view or download the latest technical information about this product, including specifications, dimensions, accessories,
and wiring, see http://www.bannerengineering.com.
•
•
•
•
•
•
Three lens options, depending on model, to vary spot size
Illuminates a large area with an even pattern of light and no shadows
12 to 30 V dc operation
Cabled and quick-disconnect models available
50 mm diameter with flat profile and 30 mm mounting base
Rugged sealed housing rated to IP69K
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Model1
LED Color
Lumens
Lux
Lens Angle
Connection
0.5 m
13780
8000
13000
5460
2500
3900
2000
1040
1700
1 m
3445
2000
3250
1365
625
WL50SWL5Q
WL50SRL5Q
WL50SGL5Q
WL50SWL11Q
WL50SRL11Q
WL50SGL11Q
WL50SWL20Q
WL50SRL20Q
WL50SGL20Q
White, 5000-8300 K
Red, 620-630 nm
Green, 520-535 nm
White, 5000-8300 K
Red, 620-630 nm
Green, 520-535 nm
White, 5000-8300 K
Red, 620-630 nm
Green, 520-535 nm
295
110
210
285
105
200
270
100
190
±5° (smaller,
more focused
spot; see graph)
5 pin Euro integral
QD connector (use
with a 4-wire
mating cordset;
only 2 wires used
for connection)
±11° (larger
spot; see graph)
975
500
±20° (largest
spot; see graph)
260
425
1
Integral QD models only are listed. For integral 2 m (6.5') PVC cable, omit suffix Q from model number (example, WL50SWL5). A model with a QD
requires a mating cordset (see 4-Pin Euro-Style Cordsets on page 3).
Original Document
158250 Rev. E
21 April 2016
158250