DEVELOPER KIT
(Info: click here)
WIT910M2
Features:
Benefits:
• Fast wireless serial data transmission
• Robust 900 MHz frequency hopping
spread spectrum technology
• More than 20 mile outdoor range with
omni-directional antennas
• 3.3 volt operation, low power
consumption
• Small size, light weight
• Certified for unlicensed operation in the
USA and Canada
• Suitable for point-to-point and point-to-
multipoint networks
• Supports large number of nodes
• High immunity to interference and
multipath fading
• Supports long range applications
• Easy to integrate
• Ideal for battery powered devices
• RoHS Compliant
900 MHz
FHSS
Transceiver
Module
WIT910M2 transceiver modules are designed to transmit serial data using highly robust 900 MHz
frequency hopping spread spectrum (FHSS) technology. WIT910M2 modules employ RFM’s
beacon-synchronized CSMA at an RF data rate of 172.8 kb/s to support a high number of remotes.
WIT910M2 transceivers are suitable for both point-to-point and point-to-multipoint networks. FHSS
technology provides strong immunity to both interference and multipath fading. The small size, light
weight and low power consumption of these transceiver modules make them suitable for a wide
variety of applications. WIT910M2 modules are certified for unlicensed operation in the USA,
Canada, Australia, Israel and New Zeland.
Shown with shield removed
General Specifications
RF Frequency
902 to 927 MHz
Radio Certifications
Operating Range
FCC Part 15, Canadian RSS-210
Indoor - 1000 ft, Outdoor - more than 20 miles with omni-directional antenna
Network Topologies
Network Protocol
Point-to-point and point-to-multipoint (star)
High remote capacity CSMA with option for limited TDMA
Error Detection and Correction
Serial Data Interface
Serial Data Rate
24-bit CRC and ARQ
Asynchronous (UART) CMOS signals, 3.3 V, 5 V tolerant
up to 115.2 kb/s, software selectable
Channel Data Rate
Number of Frequency Channels
RF Bandwidth
172.8 kb/s
54
460 kHz
Transmit Power Output
Receiver Sensitivity
Supply voltage
10, 20, 27 or 29 dBm, software selectable
-103 dBm for 10-5 BER
3.3 to 10 V for up to 27 dBm transmit power, 5 to 10 V for 29 dBm transmit power
Current Consumption
29 dBm Transmit Power,
57.6 kb/s Serial Data Rate
Remote
Operation: Standby
Receive
Sleep
250 µA
43 mA
100 mA
800 mA
Base Station Receive
Operation: Transmit
125 mA
800 mA
Transmit
Size
80.2 x 46.5 x 8.6 mm
35 g
Weight
Operating Temperature
Humidity
-40 C to 70 C
20% to 90% (non-condensing)
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 2
WIT910M2 - 6/5/08