VCXO
Page 1 of 3
VS9M: ANALOG MULTIPLIED LVPECL SERIES: ULTRA HF VCXO, LVPECL, +3.3 VDC
DESCRIPTION: A crystal controlled, high frequency, highly stable oscillator, adhering to Low Voltage Differential Signaling
(LVPECL) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in
a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for
today's automated assembly environments.
APPLICATIONS AND FEATURES:
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches;
Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz, 622.080 MHz
+3.3 VDC LVPECL
Frequency Range from 750KHz to 800MHz
Low Phase Noise Analog Multiplication
Miniature Ceramic SMD Package Available on Tape and Reel
Lead Free and ROHS Compliant
ꢂ
ABSOLUTE MAXIMUM RATINGS:
PARAMETER
SYMBOL
VALUE
UNIT
Operating temperature range Ta
-40…+85
-55…+90
+4.6
°C
°C
VDC
VDC
VDC
Storage temperature range
Supply voltage
Maximum Input Voltage
Maximum Output Voltage
T(stg)
Vcc
Vi
Vss-0.5…Vcc+0.5
Vss-0.5…Vcc+0.5
Vo
ꢂ
ELECTRICAL PARAMETERS:
SYMB
OL
fo
PARAMETER
TEST CONDITIONS*1
VALUE
UNIT
Nominal Frequency
Supply Voltage
Supply Current
Output Logic Type
Load
0.75 to 800
MHz
VDC
mA
Vcc
Is
+3.3 ±5%
100.0 MAX
LVPECL
50
Connected between each output and Vcc – 2.0 VDC
Ω
Voh
Vol
min
max
Vcc-1.025
Vcc-1.620
VDC
VDC
Output Voltage Levels
Duty Cycle
DC
Measured at 50% of output voltage swing
40/60 to 60/40 or 45/55 to 55/45
0.7 TYP 1.0 MAX*2
%
Rise / Fall Time
Frequency Stability
tr / tf Measured at 20/80% and 80/20% output voltage swing
ns
Overall conditions
Integrated Phase tji RMS, Fj = 12 kHz…20 MHz5
ppm
ps
±50 *(note 7)
0.3 TYP**
Integrated Phase RMS ti offset frequency 50KHz to 80MHz5 0.5 TYP**
ps
Fo<320MHz.
Fo>320MHz.
Fo<320MHz.
Fo>320MHz.
6 TYP **
Deterministic period Jitter Dj using
wavecrest analyzer 4
ps
ps
ps
Jitter
18 TYP **
2.5 TYP **
2.5 TYP**
30 TYP**
43 TYP**
J
Random period Jitter Rj using
wavecrest analyzer 4
Acumm. Peak to Peak Jitter Tp-p using Fo<320MHz.
wavecrest analyzer*4
Fo>320MHz.
∆f=10 Hz
∆f=100 Hz
∆f=1 KHz
∆f=10 KHz
∆f=100 KHz
∆f>1M Hz
-65
-95
-125
-140
-145
-148
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Phase Noise,TYP
typ. @212.5MHz6
£(∆f)
Fo<320MHz.
Fo>320MHz.
-50
-35
Sub Harmonics, TYP
f_sub Load, nom, Supply nom
dBc
Control Voltage Range
Settability
VC
Vfo
Positive slope; 10% linearity MAX
0 to +3.3
+1.65 ± 0.25
VDC
VDC
Absolute Pull Range
APR
See Part Numbering
ppm
Minimum guaranteed freq. pull over ∆f/fc, over all conditions
Input Impedance
Modulation Bandwidth
Zin
BW
10 MIN
10 MIN
KΩ
KHz
-3 dB
Enable High Option;
VDC
VDC
Pin 2
Output Enabled
Output Disabled
En
Dis
High Voltage or No Connect
Ground
0.7•Vcc MIN
0.3•Vcc MAX
Enable Low Option;
VDC
VDC
Pin 2
Output Disabled
Output Enabled
Dis
En
High Voltage
Ground or No Connect
0.7•Vcc MIN
0.3•Vcc MAX
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com