VND7140AJ12
Double channel high-side driver with CurrentSense analog
feedback for automotive applications
Datasheet - production data
−
Sense enable/ disable
•
Protections
−
−
−
−
−
−
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self limiting of fast thermal transients
Loss of ground and loss of VCC
Reverse battery with external
components
PowerSSO-12
GAPG040515 1112CFT
Features
−
Electrostatic discharge protection
Max transient supply voltage
VCC
VCC
40 V
Applications
Operating voltage range
4 V to 28 V
2.85 V
•
All types of automotive resistive, inductive
and capacitive loads
Minimum cranking supply
voltage (VCC decreasing)
VUSD_Cranking
RON
•
Specially intended for automotive signal
lamps (up to R10W or LED Rear
Combinations)
Typ. on-state resistance
(per Ch)
140 mΩ
Current limitation (typ)
Standby current (max)
ILIMH
ISTBY
12 A
Description
0.5 µA
The device is a double channel high-side driver
manufactured using ST proprietary VIPower®
technology and housed in PowerSSO-12
package. The device is designed to drive 12 V
automotive grounded loads through a 3 V and
5 V CMOS compatible interface, providing
protection and diagnostics.
•
•
Automotive qualified
Extreme low voltage operation for deep cold
cranking applications (compliant with LV124,
revision 2013)
•
General
−
Double channel smart high-side driver
with CurrentSense analog feedback
Very low standby current
Compatible with 3 V and 5 V CMOS
outputs
The device integrates advanced protective
functions such as load current limitation, overload
active management by power limitation and
overtemperature shutdown.
−
−
•
CurrentSense diagnostic functions
A current sense delivers high precision
proportional load current sense in addition to the
detection of overload and short circuit to ground,
short to VCC and off-state open-load.
−
Multiplexed analog feedback of: load
current with high precision proportional
current mirror
−
Overload and short to ground (power
limitation) indication
Thermal shutdown indication
Off-state open-load detection
Output short to VCC detection
A sense enable pin allows off-state diagnosis to
be disabled during the module low-power mode
as well as external sense resistor sharing among
similar devices.
−
−
−
September 2015
DocID027923 Rev 3
1/43
www.st.com
This is information on a product in full production.