TransGuard®
AVX Multilayer Ceramic Transient Voltage Suppressors
PART NUMBER IDENTIFICATION
Surface Mount Devices
Axial Leaded Devices
Important: For part number identification only, not for
construction of part numbers.
Important: For part number identification only, not for
construction of part numbers.
The information below only defines the numerical value of part number
digits, and cannot be used to construct a desired set of electrical limits.
Please refer to the TransGuard part number data (blue sections, pages
The information below only defines the numerical value of part number
digits, and cannot be used to construct a desired set of electrical limits.
Please refer to the TransGuard part number data (blue section, page 9)
®
®
3-8 & 14,16 & 22) for the correct electrical ratings.
for the correct electrical ratings.
V C 1206 05 D 150 R P
V A 1000 05 D 150 R L
TERMINATION FINISH:
X = Pt/Pd/Ag (Non-Plated)
P = Ni/Sn Alloy (Plated)
LEAD FINISH:
Copper clad steel, solder coated
PACKAGING (Pcs/Reel):
PACKAGING (Pcs/Reel):
STYLE
“D”
“R”
“T”
STYLE
“D”
“R”
“T”
VA1000 1,000
VA2000 1,000
3,000
2,500
7,500
5,000
VC0402
VC0603 1,000
VC0805 1,000
VC1206 1,000
VC1210 1,000
N/A
4,000
4,000
4,000
4,000
2,000
10,000
10,000
10,000
10,000
10,000
*
CLAMPING VOLTAGE:
Where: 100 = 10.0V
150 = 15.5V
580 = 58.0V
650 = 65.0V
101 = 100.0V
121 = 120.0V
*
*
300 = 30.0V
400 = 40.0V
CLAMPING VOLTAGE:
Where: 100 = 10.0V 500 = 50.0V
150 = 15.5V 560 = 56.0V
200 = 20.0V 580 = 58.0V
250 = 25.0V 620 = 62.0V
300 = 30.0V 650 = 65.0V
390 = 39.0V 101 = 100.0V
400 = 40.0V 121 = 120.0V
ENERGY:
Where: A = 0.1J
D = 0.4J
K = 2.0J
WORKING VOLTAGE:
Where: 03 = 3.3 VDC 26 = 26.0 VDC
05 = 5.6 VDC 30 = 30.0 VDC
14 = 14.0 VDC 48 = 48.0 VDC
18 = 18.0 VDC 60 = 60.0 VDC
ENERGY:
Where:
A = 0.1J H = 1.2J
C = 0.3J J = 1.5J
D = 0.4J P = 3.0J
F = 0.7J V = 0.02J
G = 0.9J X = 0.05J
CASE SIZE DESIGNATOR:
SIZE
LENGTH
DIAMETER
1000 4.32mm (0.170") 2.54mm (0.100")
2000 4.83mm (0.190") 3.56mm (0.140")
WORKING VOLTAGE:
Where: 03 = 3.3 VDC 18 = 18.0 VDC
05 = 5.6 VDC 26 = 26.0 VDC
09 = 9.0 VDC 30 = 30.0 VDC
12 = 12.0 VDC 48 = 48.0 VDC
14 = 14.0 VDC 60 = 60.0 VDC
CASE STYLE:
A = Axial
PRODUCT DESIGNATOR:
V = Varistor
CASE SIZE DESIGNATOR:
MARKING:
®
SIZE
LENGTH
WIDTH
All axial TransGuards are marked with vendor identification, product
identification, voltage/energy rating code and date code (see example below):
0402 1.00 0.10mm (0.040" 0.004") 0.5 0.10mm (0.020" 0.004")
0603 1.60 0.15mm (0.063" 0.006") 0.8 0.15mm (0.032" 0.006")
0805 2.01 0.2mm (0.079" 0.008") 1.25 0.2mm (0.049" 0.008")
1206 3.20 0.2mm (0.126" 0.008") 1.60 0.2mm (0.063" 0.008")
1210 3.20 0.2mm (0.126" 0.008") 2.49 0.2mm (0.098" 0.008")
AVX
TVS
05D
025
CASE STYLE:
C = Chip
Where: AVX = Always AVX (Vendor Identification)
TVS = Always TVS (Product Identification
- Transient Voltage Suppressor)
PRODUCT DESIGNATOR:
V = Varistor
05D = Working VDC and Energy Rating (Joules)
Where: 05 = 5.6 VDC, D = 0.4J
Contact Factory for Availability
*
025 = Three Digit Date Code
Where: 0 = Last digit of year (2000)
25 = Week of year
MARKING:
®
All standard surface mount TransGuard chips will not be marked. Marked
chips will be considered a special; contact factory for minimum order
requirement and price adder.
2