V
V
Precautions
Refer to pages 26 to 31 for common precautions.
Mounting
Use M3 mounting screws with plane washers or spring washers to
securely mount the Switch. Tighten the screws to a torque of 0.39 to
0.59 N S m {4 to 6 kgf S cm}.
Correct Use
Specifications Approved by TÜV Rheinland
According to EN61058-1
Insulation Distance
2
Appropriate Cable Size (mm )
According to EN61058-1, the minimum insulation thickness for this
Switch should be 1.1 mm and minimum clearance distance be-
tween the terminal and mounting plate should be 1.9 mm. If the in-
sulation distance cannot be provided in the product incorporating
the Switch, either use a Switch with insulation barrier or use a Sepa-
rator to ensure sufficient insulation distance. Refer to Separator on
page 152.
Model
Solder terminals
0.75, 1.25, 2.0
1.25, 2.0
Screw terminals
0.75, 1.25
1.25
V-10
V-15
Use M3 crimp terminals for connecting to the screw terminals.
Applicable M3 crimp terminals:
Actuator (Sold Separately)
Various Actuators are available as shown on pages 152 to 155.
Daido Solderless Terminal Mfg. Co., Ltd.
J.S.T. Mfg. Co., Ltd.
F1.25–3
1.25 B3A
Connector (Sold Separately)
Refer to Terminal Connectors on page 282.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. B010-E1-09B
125