SMD Transient Voltage Suppressor
TV15C5V0-HF Thru. TV15C441-HF
Working Peak Reverse Voltage: 5.0 - 440 Volts
Power Dissipation: 1500Watts
RoHS Device
Halogen Free
Features
SMC/DO-214AB
-Glass passivated chip.
0.280(7.02)
0.260(6.52)
-1500 W peak pulse power capability with a
10/1000µs waveform, repetitive rate
(duty cycle):0.01%
0.245(6.15)
0.220(5.52)
0.126(3.16)
0.114(2.86)
- Low leakage
- Uni and Bidirectional unit
- Excellent clamping capability.
- Very fast response time
0.320(8.02)
0.305(7.64)
0.012(0.30)
0.006(0.15)
0.103(2.59)
0.079(1.98)
Mechanical Data
-Case: DO-214AB/SMC molded plastic.
-Epoxy: UL 94V-0 rate flame retardant
-Terminals: solderable per MIL-STD-750,
0.008(0.20)
0.000(0.00)
0.060(1.51)
0.030(0.75)
Dimensions in inches and (millimeter)
method 2026.
-Polarity: Cathode band denoted.
-Weight: Approx. 0.21 grams.
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specifiec.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Symbol
Characteristics
Value
Units
Peak power dissipation at 10/1000μS
waveform (Notes.1)
PPPM
1500
W
Peak pulse current at 10/1000μS
IPPM
PD
See table 1
6.5
A
waveform (Notes.1)
Steady state power dissipation at TL=75°C
W
Peak forward surge current, 8.3mS single
half sine-wave superimposed on rated
load, uni-directional only (Notes.2)
IFSM
200
A
Maximum instantaneous forward voltage
VF
TJ
3.5/5.0
V
at 100A for uni-directional only
(Note.3)
Operation junction temperature range
-55 to +150
-55 to +150
°C
°C
Storage temperature range
Notes:
TSTG
1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 OC, per Fig. 1
2. Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
Rev. B
Page 1
Company reserves the right to improve product design , functions and reliability without notice.
QW-JTV05