Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TUSB8020B-Q1
SLLSEF7 –MARCH 2014
TUSB8020B-Q1 Automotive Two-Port USB 3.0 Hub
1 Features
3 Description
The TUSB8020B-Q1 is a two-port USB 3.0 compliant
hub. It provides simultaneous SuperSpeed USB and
high-speed/full-speed connections on the upstream
port and provides SuperSpeed USB, high-speed, full-
speed, or low-speed connections on the downstream
ports. When the upstream port is connected to an
electrical environment that only supports high-speed
or full-speed/low-speed connections, SuperSpeed
USB connectivity is disabled on the downstream
ports. When the upstream port is connected to an
electrical environment that only supports full-
speed/low-speed connections, SuperSpeed USB and
high-speed connectivity are disabled on the
downstream ports.
1
•
•
Two Port USB 3.0 Compliant Hub
USB 2.0 Hub Features
–
Multi Transaction Translator (MTT) Hub: Two
Transaction Translators
–
Four Asynchronous Endpoint Buffers Per
Transaction Translator
•
Supports USB Battery Charging Specification
Revision 1.2
–
–
–
CDP Mode (Upstream Port Connected)
DCP Mode (Upstream Port Unconnected)
DCP Mode Complies with Chinese
Telecommunications Industry Standard YD/T
1591-2009
The TUSB8020B-Q1 supports per port or ganged
power switching and over-current protection, and
supports battery charging applications.
•
•
Support D+/D- Divider Mode.
Supports Operation as a USB 3.0 or USB 2.0
Compound Device
An individually port power controlled hub switches
power on or off to each downstream port as
requested by the USB host. Also when an individually
port power controlled hub senses an over-current
event, only power to the affected downstream port
will be switched off.
•
•
Per Port or Ganged Power Switching and Over-
Current Notification Inputs
OTP ROM, Serial EEPROM or I2C/SMBus Slave
Interface for Custom Configurations:
–
–
–
VID and PID
A ganged hub switches on power to all its
downstream ports when power is required to be on
for any port. The power to the downstream ports is
not switched off unless all ports are in a state that
allows power to be removed. Also when a ganged
hub senses an over-current event, power to all
downstream ports will be switched off.
Port Customizations
Manufacturer and Product Strings (not by OTP
ROM)
–
Serial Number (not by OTP ROM)
•
Application Feature Selection Using Terminal
Selection or EEPROM/ or I2C/SMBus Slave
Interface
Device Information
ORDER NUMBER
TUSB8020BIPHPRQ1
TUSB8020BIPHPQ1
PACKAGE
BODY SIZE
•
•
Provides 128-Bit Universally Unique Identifier
(UUID)
HTQFP (48)
7mm × 7mm
Supports On-Board and In-System OTP/EEPROM
Programming Via the USB 2.0 Upstream Port
•
•
Single Clock Input, 24-MHz Crystal or Oscillator
No special driver requirements; works seamlessly
on any operating system with USB stack support
Console
Embedded
Host
2 Applications
Convenience Port
TUSB8020B-Q1
Console
•
•
•
•
•
Automotive
Convenience Port
Computer Systems
Docking Stations
Monitors
Set-Top Boxes
USB 2.0 Connection
USB 3.0 Connection
USB 3.0 Hub
USB 3.0 Port
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.