300W TRV-300 Series
Switch Mode LED Drivers
Constant Voltage
Aluminum Housing
Electrical Specifications
Input Voltage Range:
100 - 277 Nom. Vac (90 - 305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Input Current:
3.30 A @ 100Vac
50.0 A @ 230 Vac
300W
Inrush Current:
Maximum Power:
Line Regulation:
Load Regulation:
Typical Efficiency
Turn-on Delay:
Protection:
± 1%
± 3%
91-94% @ full load
0.25S
Over-Voltage, Over-Current, Over-Temperature (110°C),
and Short Circuit Protection with Auto Recovery
Environmental Specifications
Minimum Starting Temp: -35ºC
Storage Temperature:
Humidity:
-40ºC to +85ºC
• Total Power: 300 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP67
• Ultra-high Efficiency
• High Power Factor
• UL8750
10% to 100%
Cooling:
Convection
Sound Rating:
MTBF:
Class A
250,000 Hours @ 25ºC, 80% load, per MIL-HDBK-217F
100,000 Hours @ 80% load and Tc = 70ºC
Lifetime:
Constant Voltage - Product Specifications
New Surge Protection and HI-POT Testing
Output Voltage
(Vdc ±5%)
Output Current
Range (mA)
Max. Output
Power (W)
Typical
Efficiency
Model Number
TRV-300S012ST
TRV-300S024ST
TRV-300S028ST
TRV-300S036ST
TRV-300S048ST
TRV-300S054ST
12
24
28
36
48
54
0-22.9
0-12.5
0-10.71
0-8.33
0-6.25
0-5.55
275
300
300
300
300
300
91.5%
91.0%
91.5%
92.0%
94.0%
94.0%
Metal Lock Sheet
Nut
HI-POT Test
Normal Application
The new design of this LED driver provides 1.4KV surge protection. To properly
HI-POT test this unit, the surge protection must be disconnected. The screw, nut, and
metal lock sheet on the input side of the driver provide for this. To test, first remove
the nut and lock sheet as shown. After testing, secure the nut and lock sheet to
provide line-to-earth protection.
This HI-POT test feature is available on product manufactured after August 15, 2015.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-28-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com