TQP887051
802.11a/n/ac WLAN Front End Module
Applications
•
•
•
•
IEEE802.11a/n/ac WLAN Applications
Single-Chip RF Front-end Module
Wireless LAN Systems
Portable Battery-Powered Equipment
Product Features
Functional Block Diagram
•
•
•
•
•
•
•
Fully Integrated, 802.11a/n/ac front-end module
Internally matched input/output
Integrated directional detector
Temperature Compensated Bias Network
Single battery voltage of 3.2V- 4.6V
Leadless 2.5 x 2.5 x 0.40 mm SMT Pb-Free
Typ. Pout (+25C, VDD=+3.6V) = 16dBm,
EVM=1.78%, 802.11ac/MCS9/VHT80
•
•
Typ. Pout (+25C, VDD=+3.8V) = 19.7dBm,
EVM=3.0%, 802.11n/MCS7
Typ. Pout (+25C, VDD=+3.8V) = 20.3dBm,
EVM=4.6%, 64QAM, 54Mbps OFDM
General Description
Pin Configuration
The TQP887051 is full WLAN front-end module in an
ultra small 2.5mm x 2.5mm footprint package for
802.11a/n/ac applications. The TQP887051 contains 5GHz
PA, directional detector, front-end SPDT switch, and LNA
with bypass mode. The architecture and interface are
optimized for next generation WLAN integration into
handset devices.
Pin #
Symbol
GND
1, 3, 7, 12, 14, 17
Rx output
Vdd1 LNA, PA 1st stg, logic control
Vdet
PA_EN & TX switch pin
Tx
2
4
5
6
8
Spare, No connect
Vdd2 supply pin 5G PA 2nd stg
Vdd3 supply pin 5G PA 3rd stg
ANT
9
The front-end module features CMOS compatible control
voltages to facilitate ease of use. With its low power
dissipation, the front-end Module contributes to the
extended battery life of next generation WLAN solutions.
10
11
13
15
16
The front-end module is manufactured in TriQuint’s high-
reliability E/D pHEMT technology and is assembled in
ultra thin profile 2.5mm x 2.5mm x 0.40mm QFN - 16 Pb-
Free Package.
Vc1, control pin 5G RX
LNA_EN
Ordering Information
Part No.
TQP887051
Description
Packaged part
Standard T/R size = 2.5K pieces on a 7” reel.
Data Sheet: Rev F 07-18-13
- 1 of 17 -
Disclaimer: Subject to change without notice
www.triquint.com
© 2013 TriQuint