TQP7M9103
1W High Linearity Amplifier
Applications
• Repeaters
• BTS Transceivers
• BTS High Power Amplifiers
• CDMA / WCDMA / LTE
• General Purpose Wireless
3-pin SOT−89 Package
Product Features
Functional Block Diagram
• 400ꢀ–ꢀ4000 MHz
• +29.5ꢁdBm P1dB
• +45ꢁdBm Output IP3
GND
4
• 16.5ꢁdB Gain at 2140 MHz
• +5ꢁV Single Supply, 235ꢁmA Current
• Internal RF Overdrive Protection
• Internal DC Overvoltage Protection
• On chip ESD Protection
• RF Power Handling 10:1 VSWR, VCC=+5ꢁV, 2.14 GHz
Pout=+29.5ꢁdBm CW
1
2
3
RF IN
GND
RF OUT
Pout=+20ꢁdBm WCDMA
• SOT−89 Package
General Description
Pin Configuration
The TQP7M9103 is a high linearity driver amplifier in
industry standard, RoHS compliant, SOT-89 surface
mount package. This InGaP/GaAs HBT delivers high
performance across a broad range of frequencies while
achieving +45ꢀdBm OIP3 and +29.5ꢀdBm P1dB while
only consuming 235 mA quiescent current. All devices
are 100% RF and DC tested.
Pin No.
1
Label
RF IN
3
RF OUT / Vcc
GND
2, 4
The TQP7M9103 incorporates on-chip features that
differentiate it from other products in the market. The
amplifier integrates an on-chip DC over-voltage and RF
over-drive protection. This protects the amplifier from
electrical DC voltage surges and high input RF input
power levels that may occur in a system.
Ordering Information
The TQP7M9103 is targeted for use as a driver amplifier
in wireless infrastructure where high linearity, medium
power, and high efficiency are required. The device an
excellent candidate for transceiver line cards and high
power amplifiers in current and next generation multi-
carrier 3Gꢀ/ꢀ4G base stations.
Part No.
TQP7M9103
Description
1 W High Linearity Amplifier
TQP7M9103-PCB900 920ꢁ–ꢁ960ꢁMHz Evaluation Board
TQP7M9103-PCB2140 2.11ꢁ–ꢁ2.17ꢁGHz Evaluation Board
TQP7M9103-PCB2600 2.62 – 2.69 GHz Evaluation Board
Standard T/R size = 1000 pieces on a 7” reel
Datasheet: Rev H 12-10-14
Disclaimer: Subject to change without notice
- 1 of 16 -
© 2014 TriQuint
www.triquint.com