TPT480 TPT482
3.3V & 5.0V Full Duplex RS-485 Transceivers
Features
Description
⚫
Exceeds Requirements of Full Duplex EIA-485
The TPT480 and TPT482 is IEC61000 ESD protected,
which support ±12 kV IEC contact and ±15 kV IEC air
discharge. 3.0V ~ 5.5V transceivers that meet the RS-485
and RS-422 standards for Full Duplex communication.
Standard
⚫
Hot Plug Circuitry - Tx and Rx Outputs Remain Three-
State During Power-up/Power-down
Transmitters in this family deliver exceptional differential
output voltages into the RS-485 required 54Ω load. The
devices have very low bus currents so they present a true
“1/8 unit load” to the RS-485 bus. This allows up to 256
transceivers on the network without using repeaters.
⚫
⚫
⚫
⚫
⚫
⚫
Supply voltage: 3.0V ~ 5.5V
Input Common-mode Range: -7V ~ +12 V
Data Rate: 32Mbps
Up to 256 Nodes on a Bus (1/8 unit load)
Full Fail-safe Receiver (Open, Short, Terminated)
Bus-Pin Protection:
Receiver (Rx) inputs feature a “Full Fail-Safe” design,
which ensures a logic high Rx output if Rx inputs are
floating, shorted, or on a terminated but undriven bus.
±20 kV HBM ESD
±12 kV IEC61000-4-2 Contact Discharge
±15 kV IEC61000-4-2 Air Discharge
–40°C to 125°C Operation Temperature Range
The TPT480x is designed for full-duplex RS485, and
support SOP8, DFN3X3-8, MSOP10 and SOP14 package,
which is characterized from –40°C to 125°C.
⚫
Device Table
Part
Duplex
Full
Enable
Yes
Data Rate
32Mbps
Package
SOP-8
DFN3X3-8
MSOP10
SOP-14
TPT480
TPT482
Full
Yes
32Mbps
Applications
⚫
⚫
⚫
⚫
⚫
⚫
Home Appliance
Simplified Schematic
Motor Drives
Industrial Control
Grid Infrastructure
Video Surveillance
Communication Infrastructure
www.3peak.com
1 / 21
Rev. A2