Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS7A1601-Q1, TPS7A1633-Q1, TPS7A1650-Q1
SBVS188C –MARCH 2012–REVISED DECEMBER 2014
TPS7A16xx-Q1 60-V, 5-Μa IQ, 100-mA, Low-Dropout Voltage Regulator With Enable and
Power-Good
1 Features
3 Description
The TPS7A16xx-Q1 ultralow-power, low-dropout
(LDO) voltage regulators offer the benefits of ultralow
quiescent current, high input voltage, and
miniaturized, high-thermal-performance packaging.
1
•
•
Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
The TPS7A16xx-Q1 devices are designed for
continuous or sporadic (power backup) battery-
powered applications where ultralow quiescent
current is critical to extending system battery life.
–
–
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C3B
•
•
•
•
•
•
•
Wide Input Voltage Range: 3 V to 60 V
Ultralow Quiescent Current: 5 µA
Quiescent Current at Shutdown: 1 µA
Output Current: 100 mA
The TPS7A16xx-Q1 devices offer an enable pin (EN)
compatible with standard CMOS logic and an
integrated open-drain active-high power-good output
(PG) with a user-programmable delay. These pins are
intended for use in microcontroller-based, battery-
powered applications where power-rail sequencing is
required.
Low Dropout Voltage: 60 mV at 20 mA
Accuracy: 2%
Available in:
In addition, the TPS7A16xx-Q1 devices are ideal for
–
–
Fixed Output Voltage: 3.3 V, 5.0 V
generating
a
low-voltage supply from multicell
Adjustable Version From Approximately 1.2 to
18.5 V
solutions ranging from high-cell-count power-tool
packs to automotive applications; not only can these
devices supply a well-regulated voltage rail, but they
can also withstand and maintain regulation during
voltage transients. These features translate to simpler
and more cost-effective, electrical surge-protection
circuitry.
•
•
•
Power-Good With Programable Delay
Current-Limit and Thermal Shutdown Protections
Stable With Ceramic Output Capactors:
≥ 2.2 µF
•
Package: High-Thermal-Performance MSOP-8
PowerPAD™ Package
Device Information(1)
PART NUMBER
TPS7A1601-Q1
TPS7A1633-Q1
TPS7A1650-Q1
PACKAGE
BODY SIZE (NOM)
2 Applications
HVSSOP (8)
3.00 mm x 3.00 mm
•
High Cell-Count Battery Packs for Power Tools
and Other Battery-Powered Microprocessor and
Microcontroller Systems
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
•
•
•
Car Audio, Navigation, Infotainment, and Other
Automotive Systems
Typical Application Schematic
Power Supplies for Notebook PCs, Digital TVs,
and Private LAN Systems
VIN
60 V
Smoke/CO2 Detectors and Battery-Powered
Alarm/Security Systems
12 V
t
VOUT
VIN
IN
OUT
VCC mC2
CIN
COUT
EN
RPG
TPS7A16XX-Q1
VEN
EN
DELAY
PG
IO1
GND
VPG
CDELAY
IO3
mC1
IO2
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.