TPS61158
www.ti.com
SLVSBR3 –MAY 2013
30V WLED Driver with Integrated Power Diode
Check for Samples: TPS61158
1
FEATURES
DESCRIPTION
With 30V rated integrated switch FET and power
diode, the TPS61158 is a boost converter that drives
LEDs in series. The boost converter runs at 750kHz
fixed switching frequency to reduce output ripple,
improve conversion efficiency, and allows for the use
of small external components.
•
•
•
2.7V to 5.5V Input Voltage Range
28V Open LED Protection (up to 8 LEDs)
Integrated 0.6A 30V Internal Switch FET and
Power Diode
•
•
750kHz Switching Frequency
The default white LED current is set with the external
sensor resistor RFB, and the feedback voltage is
regulated to 200mV, as shown in the typical
application. During the operation, the LED current can
be controlled using the 1-wire digital interface
(Easyscale™ protocol) through the CTRL pin.
Alternatively, a pulse width modulation (PWM) signal
can be applied to the CTRL pin through which the
duty cycle determines the feedback reference
voltage. In either digital or PWM mode, the
TPS61158 does not burst the LED current; therefore,
it does not generate audible noises on the output
capacitor. For maximum protection, the device
features integrated open LED protection that disables
the TPS61158 to prevent the output voltage from
exceeding the IC's absolute maximum voltage ratings
during open LED conditions. The TPS61158 is
available in a space-saving, 2mm × 2mm QFN
package with thermal pad.
Flexible Digital and PWM Brightness Control
–
–
1-Wire Control Interface (EasyScale)
PWM Dimming Control Interface
•
•
•
•
•
•
Up to 100:1 PWM Dimming Ratio
Integrated Loop Compensation
Built-in Soft Start
Built-in WLED Open protection
Thermal Shutdown
2mm x 2mm x 0.8mm 6-pin QFN Package with
Thermal Pad
APPLICATIONS
•
•
•
•
•
•
Feature Phones
Smart Phones
Portable Media Players
Ultra Mobile Devices
GPS Receivers
TYPICAL APPLICATION
L
Backlight for Small and Media Form Factor
LCD Display
22µH
2.7V ~ 5.5V
VBAT
Up to 8 LEDs
Cin
2.2µF
Cout
1µF
TPS61158
VIN
LX
PWM or 1-wire
dimming control
CTRL
GND
VOUT
FB
RFB
10ꢀ
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated