TPS43331-Q1
www.ti.com
SLVSA38 –DECEMBER 2009
DUAL SWITCHER AND LINEAR REGULATORS
Check for Samples: TPS43331-Q1
1
FEATURES
•
Input Operating Range 5 V to 30 V (VBAT),
With Transients Up to 40 V
•
•
Enable Feature, Controls VBUCK 1
Programmable Power Good Delay Time
•
Two, Adjustable Output Voltage, Step-Down
Switching Voltage Regulators
(PGDLY) for VSTBY
•
Current-Limit and Independent Thermal
Detection and Shutdown Protection on All
Regulators and High-Side Driver Output
•
•
•
External Clock Input
Soft-Start Control for Step-Down Regulators
•
•
Operating Junction Temperature Range: -40°C
to 150°C
Programmable, Linear Regulator (VSTBY), Low
Quiescent Current (65uA typ.)
Thermally Enhanced 38-Pin DAP PowerPAD™
Package
•
•
•
•
Programmable, Linear Regulator (VLR)
Overvoltage Detection and Shutdown
Protected, High-Side Drive Ouput (HSD)
APPLICATIONS
Power-On Reset for Standby Regulator
(VSTBY)
•
•
Qualified for Automotive Applications
Power Supply for Microcontrollers and DSPs
•
•
Serial Communication, I2C Interface
Low Voltage Warning Detection With
Programmable Input Threshold (LVWIN,
VBATW)
DESCRIPTION
The TPS43331 is a multi-rail output voltage regulator, with two synchronous switch mode controllers and two
linear regulators. In addition, there is a reverse protected high side switch and voltage supervisor for monitoring
the standby regulator and input voltage. The regulator outputs and high side switch are controlled either by
discrete inputs for certain outputs and serial interface using the I2C configuration for outputs not controlled by
discrete inputs.
The standby linear regulator (VSTBY) is high voltage tolerant and can be connected directly to the vehicle
battery, the quiescent current is typically 65 µA to maintain a regulated output with light loads.
SIMPLIFIED SCHEMATIC
EFFICIENCY vs LOAD CURRENT (VOUT = 5 V)
100
PGDLY
CSLEW
VCP
CBS1
VGT1
VBUCK 1
PH1
90
80
70
60
VGB1
VBAT*
VBATP
LVWIN
CBS2
VGT2
PH2
Vsupply
VBUCK 2
TPS43331
VINSB
VBAT
VGB2
VSTBY
VSTBY
VLREG
HSD
50
EN
I2CID
7Vin
VLR
HSD
SDA
40
12Vin
SCL
SYNCH
18Vin
30
RST*
AGnd
24Vin
fSW = 185 kHz
20
0
0.5
1
1.5
2
2.5
Load Current (A)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated