TNPW
Vishay
High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C)
FEATURES
• Metal film layer on high quality ceramic
• Protective top coat
• Tin/lead (Pb) solder contacts
• Excellent overall stability at different environmental
conditions ≤ 0.05 % (1000 h rated power at + 70 °C)
• Low temperature coefficient and tight tolerances ( 0.1 %;
10 ppm/K)
APPLICATIONS
• Automotive
• Telecommunication
• Medical Equipment
• Industrial Equipment
TNPW Precision Thin Film Flat Chip Resistors are the
perfect choice for most fields of modern electronics where
reliability and stability is of major concern. Typical
applications include telecommunication, industrial, medical
equipment, high-end computer and audio/video electronics.
STANDARD ELECTRICAL SPECIFICATIONS
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW12101)
TNPW2010
TNPW25121)
Metric Size
RR 1005M
RR 1608M
RR 2012M
RR 3216M
RR 3225M
RR 5025M
RR 6332M
Resistance range
10
Ω
to 100 k
Ω
10
Ω
to 332 k
Ω
10
Ω
to 1 M
Ω
10
1 %; 0.5 %; 0.1 %
50 ppm/K; 25 ppm/K; 15 ppm/K; 10 ppm/K
Ω
to 2 M
Ω
10 Ω to 3.01 MΩ 10 Ω to 4.99 MΩ 10 Ω to 8.87 MΩ
Resistance
tolerance
Temperature
Coefficent
50 ppm/K; 25 ppm/K
Climatic category
(LCT/UCT/days)
55/125/56
0.063 W
50 V
55/125/56
0.1 W
55/125/56
0.125 W
150 V
55/125/56
0.25 W
200 V
55/125/56
0.33 W
200 V
55/125/56
0.4 W
55/125/56
0.5 W
Rated dissipation,
2)
P70
Operating voltage,
Umax AC/DC
75 V
300 V
300 V
Maximum permissible
film temperature
155 °C
155 °C
155 °C
155 °C
155 °C
155 °C
155 °C
Thermal resistance3)
Insulation voltage:
Uins 1 min
870 K/W
550 K/W
440 K/W
220 K/W
170 K/W
140 K/W
110 K/W
75 V
75 V
100 V
75 V
200 V
75 V
300 V
75 V
300 V
75 V
300 V
75 V
300 V
75 V
continuous
Failure rate
≤ 0.3 x 10-9/h
≤ 0.3 x 10-9/h
2 g
≤ 0.3 x 10-9/h
5.5 g
≤ 0.3 x 10-9/h
10 g
≤ 0.3 x 10-9/h
≤ 0.3 x 10-9/h
≤ 0.3 x 10-9/h
Weight/1000 pcs.
0.65 g
16 g
28 g
39 g
1) Size not specified in EN 140401-801
• TNPW 0402 without marking
• Extended values, tighter tolerances and temperature coefficient
available on request
2)
Rated voltage P × R . The power dissipation on the resistor
generates a temperature rise against the local ambient, depending
on the heat flow support of the printed-circuit board (thermal
resistance). The rated dissipation applies only if the permitted film
temperature is not exceeded
3) Measuring conditions in accordance with EN 140401-801
www.vishay.com
66
For technical questions contact: ff3aresistors@vishay.com
Document Number: 31006
Revision: 06-Jul-06