Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TMP75B-Q1
SBOS721 –OCTOBER 2014
TMP75B-Q1 1.8-V Digital Temperature Sensor with Two-Wire Interface and Alert
1 Features
3 Description
The TMP75B-Q1 is an integrated digital temperature
sensor with a 12-bit analog-to-digital converter (ADC)
that can operate at a 1.8-V supply, and is pin and
register compatible with the industry-standard LM75
and TMP75. This device is available in SOIC-8 and
VSSOP-8 packages, and requires no external
components to sense the temperature. The TMP75B-
Q1 is capable of reading temperatures with a
resolution of 0.0625°C and is specified over a
temperature range of –40°C to 125°C.
1
•
Qualified for Automotive Applications
•
AEC-Q100 Qualified with the Following Results:
–
–
–
Temperature Grade 1: –40°C to 125°C
HBM ESD Classification 2
CDM ESD Classification C4B
•
•
•
•
•
•
•
•
Digital Output with Two-Wire Serial Interface
Up to 8 Pin-Programmable Bus Addresses
Programmable Overtemperature ALERT
Shutdown Mode for Power Saving
One-Shot Conversion Mode
The TMP75B-Q1 features SMBus and two-wire
interface compatibility, and allows up to eight devices
on the same bus with the SMBus overtemperature
alert function. The programmable temperature limits
and the ALERT pin allow the sensor to operate as a
stand-alone thermostat, or an overtemperature alarm
for power throttling or system shutdown.
Operating Temperature Range: –40°C to 125°C
Operating Supply Range: 1.4 V to 3.6 V
Quiescent Current:
–
–
45 μA Active (typ)
The factory-calibrated temperature accuracy and the
noise-immune digital interface make the TMP75B-Q1
the preferred solution for temperature compensation
of other sensors and electronic components, without
the need for additional system-level calibration or
elaborate board layout for distributed temperature
sensing.
0.3 μA Shutdown (typ)
•
Accuracy:
–
–
±0.5°C (typ) from –20°C to 85°C
±1°C (typ) from –40°C to 125°C
•
•
Resolution: 12 Bits (0.0625°C)
Packages: SOIC-8 and VSSOP-8
The TMP75B-Q1 is ideal for thermal management
and protection of a variety of automotive applications,
and is a high-performance alternative to a PCB-
mounted NTC thermistor.
2 Applications
•
•
•
•
•
•
•
Automotive Embedded Systems
ECU Processor Temperature Monitoring
TCM Processor Temperature Monitoring
BCM Processor Temperature Monitoring
LED Headlight Thermal Control
Device Information(1)
DEVICE NAME
PACKAGE
SOIC (8)
VSSOP (8)
BODY SIZE (NOM)
4.90 mm × 3.90 mm
3.00 mm × 3.00 mm
TMP75B-Q1
Battery Thermal Protection
(1) For all available packages, see the package option addendum
at the end of the datasheet.
Electrical Motor Driver Thermal Protection
Temperature Accuracy (Error) vs Ambient
Temperature
Simplified Schematic
1.4 V to 3.6 V
3
2
0.01 PF
1
TMP75B-Q1
1
2
3
4
8
7
6
5
SDA
SCL
VS
A0
A1
A2
0
Two-Wire
Host Controller
±1
ALERT
GND
Mean
±2
Mean - 61
Mean + 61
±3
±75 ±50 ±25
0
25
50
75
100 125 150
Temperature (C)
C005
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.