Datasheet > TLV5604CDG4

TLV5604CDG4

更新时间： 2024-02-11 18:19:29

品牌	Logo	应用领域
德州仪器 - TI		光电二极管转换器
页数	文件大小	规格书
31页	548K
描述
2.7-V TO 5.5-V 10-BIT 3-Î¼S QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

TLV5604CDG4 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	SOIC
包装说明：	SOP, SOP16,.25	针数：	16
Reach Compliance Code：	compliant	Factory Lead Time：	6 weeks
风险等级：	5.17	最大模拟输出电压：	5.1 V
最小模拟输出电压：		转换器类型：	D/A CONVERTER
输入位码：	BINARY	输入格式：	SERIAL
JESD-30 代码：	R-PDSO-G16	JESD-609代码：	e4
长度：	9.9 mm	最大线性误差 (EL)：	0.0977%
湿度敏感等级：	1	位数：	10
功能数量：	1	端子数量：	16
最高工作温度：	70 °C	最低工作温度：
封装主体材料：	PLASTIC/EPOXY	封装代码：	SOP
封装等效代码：	SOP16,.25	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	260
电源：	3/5 V	认证状态：	Not Qualified
采样速率：	0.102 MHz	座面最大高度：	1.75 mm
最大稳定时间：	18 µs	标称安定时间 (tstl)：	3 µs
子类别：	Other Converters	最大压摆率：	5.5 mA
标称供电电压：	3 V	表面贴装：	YES
技术：	CMOS	温度等级：	COMMERCIAL
端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	3.91 mm
Base Number Matches：	1

TLV5604CDG4 数据手册

TLV5604

2.7-V TO 5.5-V 10-BIT 3-µS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS

WITH POWER DOWN

SLAS176B – DECEMBER 1997 – REVISED JULY 2002

Four 10-Bit D/A Converters

Hardware Power Down (10 nA)

Software Power Down (10 nA)

Simultaneous Update

Programmable Settling Time

of 3 µs or 9 µs Typ

TMS320, (Q)SPI , and Microwire

Compatible Serial Interface

applications

Internal Power-On Reset

Battery Powered Test Instruments

Digital Offset and Gain Adjustment

Industrial Process Controls

Low Power Consumption:

5.5 mW, Slow Mode – 5-V Supply

3.3 mW, Slow Mode – 3-V Supply

Machine and Motion Control Devices

Communications

Reference Input Buffers

Voltage Output Range . . . 2× the Reference

Input Voltage

Arbitrary Waveform Generation

Monotonic Over Temperature

D OR PW PACKAGE

(TOP VIEW)

Dual 2.7-V to 5.5-V Supply (Separate Digital

and Analog Supplies)

REFINAB

OUTA

OUTB

OUTC

OUTD

REFINCD

AGND

description

LDAC

DIN

SCLK

The TLV5604 is a quadruple 10-bit voltage output

digital-to-analog converter (DAC) with a flexible

4-wire serial interface. The 4-wire serial interface

allows glueless interface to TMS320, SPI, QSPI,

and Microwire serial ports. The TLV5604 is

programmed with a 16-bit serial word comprised

ofaDACaddress, individualDACcontrolbits, and

a 10-bit DAC value.

DGND

The device has provision for two supplies: one digital supply for the serial interface (via pins DV

and DGND),

and one for the DACs, reference buffers and output buffers (via pins AV

and AGND). Each supply is

independent of the other, and can be any value between 2.7 V and 5.5 V. The dual supplies allow a typical

application where the DAC will be controlled via a microprocessor operating on a 3-V supply (also used on pins

and DGND), with the DACs operating on a 5-V supply. Of course, the digital and analog supplies can be

tied together.

The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The buffer features a Class AB

output stage to improve stability and reduce settling time. A rail-to-rail output stage and a power-down mode

makes it ideal for single voltage, battery based applications. The settling time of the DAC is programmable to

allow the designer to optimize speed versus power dissipation. The settling time is chosen by the control bits

within the 16-bit serial input string. A high-impedance buffer is integrated on the REFINAB and REFINCD

terminals to reduce the need for a low source impedance drive to the terminal. REFINAB and REFINCD allow

DACs A and B to have a different reference voltage then DACs C and D.

The device, implemented with a CMOS process, is available in 16-terminal SOIC and TSSOP packages. The

TLV5604C is characterized for operation from 0°C to 70°C. The TLV5604I is characterized for operation from

–40°C to 85°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

SPI and QSPI are trademarks of Motorola, Inc.

Microwire is a trademark of National Semiconductor Corporation.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6 7...31

下载PDF

与TLV5604CDG4相关器件

型号	品牌	描述	获取价格	数据表
TLV5604CDR	TI	2.7-V TO 5.5-V 10-BIT 3-mS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格
TLV5604CDRG4	TI	2.7-V TO 5.5-V 10-BIT 3-Î¼S QUADRUPLE DIGITAL	获取价格
TLV5604CPW	TI	2.7-V TO 5.5-V 10-BIT 3-mS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格
TLV5604CPWG4	TI	10-Bit, 3 us Quad DAC, Serial Input, Simultaneous Update, Programmable Settling Time, Powe	获取价格
TLV5604CPWLE	TI	暂无描述	获取价格
TLV5604CPWR	TI	2.7-V TO 5.5-V 10-BIT 3-mS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格

与TLV5604CDG4相关文章

MAX6675资料手册参数详解、引脚配置说明
2024-05-13

10
LM258引脚图及功能介绍、主要参数分析
2024-05-13

5
CD4052资料手册参数详解、引脚配置说明
2024-05-13

7
一文带你了解TPS5430资料手册分析：参数介绍、引脚配置说明
2024-05-13

6

产品中心

服务支持

精选活动

关于我们

帮助中心

TLV5604CDG4

TLV5604CDG4 技术参数

TLV5604CDG4 数据手册

与TLV5604CDG4相关器件

与TLV5604CDG4相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TLV5604CDG4

TLV5604CDG4 技术参数

TLV5604CDG4 数据手册

与TLV5604CDG4相关器件

与TLV5604CDG4相关文章

您还可以找

您在本页遇到什么问题？