5秒后页面跳转
TFA9882 PDF预览

TFA9882

更新时间: 2024-09-28 08:49:55
品牌 Logo 应用领域
恩智浦 - NXP 音频放大器
页数 文件大小 规格书
31页 984K
描述
3.4 W I2S input mono class-D audio amplifier

TFA9882 数据手册

 浏览型号TFA9882的Datasheet PDF文件第2页浏览型号TFA9882的Datasheet PDF文件第3页浏览型号TFA9882的Datasheet PDF文件第4页浏览型号TFA9882的Datasheet PDF文件第5页浏览型号TFA9882的Datasheet PDF文件第6页浏览型号TFA9882的Datasheet PDF文件第7页 
TFA9882  
3.4 W I2S input mono class-D audio amplifier  
Rev. 2 — 20 April 2011  
Product data sheet  
1. General description  
The TFA9882 is a mono, filter-free class-D audio amplifier in a 9-bump WLCSP (Wafer  
Level Chip-Size Package) with a 400 μm pitch.  
It receives audio and control settings via an I2S digital interface. The Power-down to  
Operating mode transition is triggered when a clock signal is detected on the bit clock  
input (BCK). Two devices can be combined to build a stereo application.  
In stereo applications, the left or right I2S audio stream is selected by connecting the word  
select signal to, respectively, pin WSL or pin WSR. Mono mixing can be achieved by  
connecting the word select signal to both WSL and WSR. Switching off the word select  
signal selects Mute mode.  
The device features low RF susceptibility because it has a digital input interface that is  
insensitive to clock jitter. The second order closed loop architecture used in the TFA9882  
provides excellent audio performance and high supply voltage ripple rejection.  
2. Features and benefits  
„ Small outline WLCSP9 package: 1.27 × 1.49 × 0.6 mm  
„ Wide supply voltage range (fully operational from 2.5 V to 5.5 V)  
„ High efficiency (90 %, 4 Ω/20 μH load) and low power dissipation  
„ Quiescent power:  
‹ 6.5 mW (VDDD = 1.8 V, VDDP = 3.6 V, 4 Ω/20 μH load, fs = 32 kHz)  
‹ 7.65 mW (VDDD = 1.8 V, VDDP = 3.6 V, 4 Ω/20 μH load, fs = 48 kHz)  
„ Output power:  
‹ 1.4 W into 4 Ω at 3.6 V supply (THD = 1 %)  
‹ 2.7 W into 4 Ω at 5.0 V supply (THD = 1 %)  
‹ 3.4 W into 4 Ω at 5.0 V supply (THD = 10 %)  
„ Output noise voltage: 24 μV (A-weighted)  
„ Signal-to-noise ratio: 103 dB (VDDP = 5 V, A-weighted)  
„ Fully short-circuit proof across load and to supply lines  
„ Current limiting to avoid audio holes  
„ Thermally protected  
„ Undervoltage and overvoltage protection  
„ High-pass filter for DC blocking  
„ Simplified interface for audio and control settings  
„ Left/right selection and mono mixing  
„ Three gain settings: 3 dB, 0 dB and +3 dB  

与TFA9882相关器件

型号 品牌 获取价格 描述 数据表
TFA9882UK NXP

获取价格

3.4 W I2S input mono class-D audio amplifier
TFA9887 NXP

获取价格

Audio system with adaptive sound maximizer and speaker protection
TFA9887UK NXP

获取价格

Audio system with adaptive sound maximizer and speaker protection
TFA9888UK NXP

获取价格

Audio Amplifier
TFA9888UK/N1Z NXP

获取价格

TFA9888 - Stereo Smart Audio Amplifier
TFA9891UK/N1AZ NXP

获取价格

TFA9891 - Smart Audio Amplifier
TFA9895 NXP

获取价格

Boosted class-D audio amplifier with speaker boost protection and multiband dynamic range
TFA9895UK NXP

获取价格

Boosted class-D audio amplifier with speaker boost protection and multiband dynamic range
TFA9896 NXP

获取价格

Boosted audio system with adaptive sound maximizer and speaker protection
TFA9896BUK NXP

获取价格

Boosted audio system with adaptive sound maximizer and speaker protection