TDA9897; TDA9898
NXP Semiconductors
Multistandard hybrid IF processing
2.4 Dual mode
I Fully performed DTV processing and additional ATV video signal processing in
parallel, but with reduced performance, for very fast channel scan
I VIF AGC voltage monitor output or port function
I VIF AFC current monitor output or TAGC voltage output
2.5 FM radio mode
I Gain controlled wide-band Radio IF (RIF) amplifier; AC-coupled
I Buffered RIF amplifier wide-band output, gain controlled by internal RIF AGC
I Fully integrated BP filter for 2nd RIF at 4.5 MHz, 5.5 MHz, 6.0 MHz, 6.5 MHz or
10.7 MHz
I 2nd RIF output, gain controlled by internal RIF AGC or by internal FM carrier AGC for
DSP
I Alignment-free selective FM PLL demodulator with high linearity and low noise
I Precise fully digital AFC detector with 4-bit DAC; AFC bits read-out via I2C-bus
I Port function
I Radio AFC current or tuner, RIF or FM AGC voltage monitor output
3. Applications
I Analog and digital TV front-end applications for TV sets, recording applications and
personal computer cards
4. Quick reference data
Table 1.
Quick reference data
VP = 5 V; Tamb = 25 °C.
Symbol
Parameter
Conditions
Min
4.5
-
Typ
5.0
-
Max
5.5
Unit
V
[1]
VP
IP
supply voltage
supply current
190
mA
Analog TV signal processing
Video part
Vi(IF)(RMS)
RMS IF input voltage
lower limit at −1 dB video
-
60
100
µV
output signal
GVIF(cr)
fVIF
control range VIF gain
VIF frequency
60
-
66
-
-
-
dB
see Table 25
MHz
∆fVIF(dah)
digital acquisition help VIF
frequency window
related to fVIF
all standards except M/N
M/N standard
-
-
±2.3
±1.8
-
-
MHz
MHz
Vo(video)(p-p) peak-to-peak video output voltage see Figure 10
[2]
[3]
positive or negative
modulation; normal mode
and sound carrier on
1.7
-
2.0
1.1
2.3
-
V
V
trap bypass mode and
sound carrier off
TDA9897_TDA9898_3
© NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 03 — 11 January 2008
3 of 103