TA 22
Vishay Sfernice
Single Value Chip Resistor
FEATURES
• Small size 20 mil square
• Resistance range 10 Ω to 1 MΩ
RoHS
• Resistor material: self-passivating Tantalum
COMPLIANT
nitride
• Silicon substrate for good power dissipation
• Low cost
Actual Size
TYPICAL PERFORMANCE
Thin film resistors are often an excellent solution for analog
design problems where space is limited and high packing
density is required. Due to their Tantalum Nitride resistive
layer these resistors are stable 0.07 % (2000 hours, rated
power at 70 °C) and moisture resistant.
ABS
TCR
TOL
100 ppm/°C
0.5 %
SCHEMATIC AND PATTERN
R
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
MATERIAL
TANTALUM NITRIDE
Resistance Range
Absolute TCR
10 Ω to 1 MΩ
100 ppm/°C ( 50 ppm/°C on request)
0.5 %, 1 %, 2 %
- 55 °C to + 155 °C
Absolute Tolerance
Power Dissipation
Stability
100 mW at 25 °C, 50 mW at + 70 °C, 25 mW at + 125 °C
0.07 % typical, 0.1 Max.
< 0.1 ppm/Volt
2000 hrs. at + 70 °C at Pn
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
50 Volts DC
- 55 °C to + 155 °C
- 55 °C to + 155 °C
< - 35 dB typical
MIL-STD-202 Method 308
1 year at + 25 °C
Thermal EMF
< 0.01 µV/°C
Shelf Life Stability
100 ppm
www.vishay.com
156
For technical questions, contact: sfer@vishay.com
Document Number: 60062
Revision: 21-Aug-06