Datasheet > 传感器/换能器 > 压力传感器> SSCDNND150PASA5

SSCDNND150PASA5

更新时间： 2024-02-07 19:24:29

品牌	Logo	应用领域
霍尼韦尔 - HONEYWELL		传感器换能器压力传感器
页数	文件大小	规格书
12页	1201K
描述
Peizoresistive Sensor, Absolute, 0Psi Min, 150Psi Max, 0.25%, Rectangular, Through Hole Mount, ROHS COMPLIANT, CERAMIC, DIP-8

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SSCDNND150PASA5 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	unknown	风险等级：	5.69
Is Samacsys：	N	最大精度 (%)：	0.25%
外壳：	CERAMIC	安装特点：	THROUGH HOLE MOUNT
位数：	12	最大工作电流：	2.1 mA
最高工作温度：	85 °C	最低工作温度：	-40 °C
输出接口类型：	SPI INTERFACE	输出类型：	DIGITAL VOLTAGE
封装形状/形式：	RECTANGULAR	端口类型：	STRAIGHT
最大压力范围：	8.702 Psi	最小压力范围：
压力传感模式：	GAGE	响应时间：	460 µs
传感器/换能器类型：	PRESSURE SENSOR,PEIZORESISTIVE	最大供电电压：	3.6 V
最小供电电压：	3 V	表面贴装：	NO
端接类型：	SOLDER	Base Number Matches：	1

SSCDNND150PASA5 数据手册

Table 3. Environmental Specifications

Parameter

Characteristic

Humidity:

Dry gases only (See “Options N and D” in Figure 1.)

Liquid media (See “Options T and V” in Figure 1.)

0% to 95% RH, non-condensing

100% condensing or direct liquid media on Port 1

MIL-STD-202F, Curve AK (20.7 g random)

MIL-STD-202F, Method 213B, Condition F

1 million cycles minimum

Vibration

Shock

Life⁹

Solder reflow

J-STD-020-C

Table 4. Wetted Materials¹⁰

Parameter

Covers

Port 1 (Pressure Port)

high temperature polyamide

alumina ceramic

Port 2 (Reference Port)

high temperature polyamide

alumina ceramic

Substrate

Adhesives

epoxy, silicone

Electronic components

Notes:

ceramic, glass, solder, silicon

silicon, glass, gold, solder

1. Absolute maximum ratings are the extreme limits the device will withstand without damage.

2. Ratiometricity of the sensor (the ability of the digital device to maintain performance parameters independent of supply voltage) is achieved

within the specified operating voltage for each option.

3. The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

4. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure within

the specified performance limits.

5. The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may not

remain within the specified performance limits.

6. Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at

25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.

7. Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.

Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal

effect on span, and thermal hysteresis.

8. Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of

the pressure range. (See Figure 1 for ranges.)

9. Life may vary depending on specific application in which sensor is utilized.

10. Contact Honeywell Customer Service for detailed material information.

CAUTION

PRODUCT DAMAGE

Ensure liquid media is applied to Port 1 only; Port 2 is not compatible with liquids.

Ensure liquid media contains no particulates. All TruStability^®sensors are dead-ended devices. Particulates can accumulate

inside the sensor, causing damage or affecting sensor output.

Recommend that the sensor be positioned with Port 1 facing downwards; any particulates in the system are less likely to

enter and settle within the pressure sensor if it is in this position.

Ensure liquid media does not create a residue when dried; build-up inside the sensor may affect sensor output. Rinsing of a

dead-ended sensor is difficult and has limited effectiveness for removing residue.

Ensure liquid media are compatible with wetted materials. Non-compatible liquid media will degrade sensor performance and

may lead to sensor failure.

Failure to comply with these instructions may result in product damage.

Honeywell Sensing and Control

1 234 5 6 7...12

下载PDF

与SSCDNND150PASA5相关器件

型号	品牌	描述	获取价格	数据表
SSCDNND150PG2A3	HONEYWELL	Peizoresistive Sensor, Gage, 0Psi Min, 150Psi Max, 0.25%, 0.20-0.80V, Rectangular, Through	获取价格
SSCDNND150PG2A5	HONEYWELL	Peizoresistive Sensor, Gage, 0Psi Min, 150Psi Max, 0.25%, 0.20-0.80V, Rectangular, Through	获取价格
SSCDNND150PG4A3	HONEYWELL	Peizoresistive Sensor, Gage, 0Psi Min, 150Psi Max, 0.25%, 0.20-0.80V, Rectangular, Through	获取价格
SSCDNND150PG4A5	HONEYWELL	Peizoresistive Sensor, Gage, 0Psi Min, 150Psi Max, 0.25%, 0.20-0.80V, Rectangular, Through	获取价格
SSCDNND150PGAA3	HONEYWELL	Peizoresistive Sensor, Gage, 0Psi Min, 150Psi Max, 0.25%, Rectangular, Through Hole Mount,	获取价格
SSCDNND150PGSA5	HONEYWELL	Peizoresistive Sensor, Gage, 0Psi Min, 150Psi Max, 0.25%, Rectangular, Through Hole Mount,	获取价格

与SSCDNND150PASA5相关文章

SG3525资料手册详解：SG3525参数分析、引脚说明、应用介绍
2024-05-23

2
AT89C51单片机资料手册详细解析及应用示例
2024-05-23

5
CP2102资料手册解读：CP2102引脚说明、关键参数分析
2024-05-23

3
资料手册解读：UC3842参数和管脚说明
2024-05-22

5

产品中心

服务支持

精选活动

关于我们

帮助中心

SSCDNND150PASA5

SSCDNND150PASA5 技术参数

SSCDNND150PASA5 数据手册

与SSCDNND150PASA5相关器件

与SSCDNND150PASA5相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SSCDNND150PASA5

SSCDNND150PASA5 技术参数

SSCDNND150PASA5 数据手册

与SSCDNND150PASA5相关器件

与SSCDNND150PASA5相关文章

您还可以找

您在本页遇到什么问题？