Datasheet > SPFMOR302

SPFMOR302

更新时间： 2024-02-18 03:25:16

品牌	Logo	应用领域
安华高科 - AVAGO		放大器光纤
页数	文件大小	规格书
7页	605K
描述
FIBER OPTIC RECEIVER, 25Mbps, THROUGH HOLE MOUNT, CAI PACKAGE-4

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

SPFMOR302 技术参数

Top Layer with 180˚ version of the pigtail:

Bottom Layer (seen from the top side of the PCB):

Bottom Layer: Bottom side / positions

Other items

•ꢀꢀ The shown circuit for the –3dB attenuation is just a proposal. Also any other circuit which can double the value of

Rext is permitted.

•ꢀꢀ Due to the fact that the optical average level jumps if the power control signal (/-3dB) is toggled, LOCK/ coding –

errors can occur at the subsequent device for a short time. This is not very critical, since it occurs only in diagnosis

mode. After a time of 10ms, the device should lock again if the optical attenuation between the devices is not too

high.

•ꢀꢀ The Rx and Tx signals can be measured by using standard probes (>1M/<10pF). However, if the signal quality is very

bad, and the LOCK signal of the MOST chip is ﬂaky, connecting a passive probe to the Rx signal can cause the MOST

chip to lock better or worse to the signal. This is due to the capacitance of the analog probe which is usually in the

range of 8..12pF, which shifts the phase and PWD of the signal. In this case an active probe with a capacitance of less

than 1pF is recommended.

•ꢀꢀ The reference test board which corresponds to the layout examples above, is available at the

Oasis SiliconSystems AG.

1...3 4 567

下载PDF

型号	品牌	描述	获取价格	数据表
SPFMOT302	AVAGO	FIBER OPTIC TRANSMITTER, 640-660nm, 25Mbps, THROUGH HOLE MOUNT, CAI PACKAGE-4	获取价格
SPFMPR302	AVAGO	FIBER OPTIC RECEIVER, 25Mbps, THROUGH HOLE MOUNT, CAI PACKAGE-4	获取价格
SPFMPT402	AVAGO	FIBER OPTIC TRANSMITTER	获取价格
SPFMYR302	AVAGO	FIBER OPTIC RECEIVER, 25Mbps, THROUGH HOLE MOUNT	获取价格
SPFMYT302	AVAGO	FIBER OPTIC TRANSMITTER, 640-660nm, 25Mbps, THROUGH HOLE MOUNT	获取价格
SPFR250	LITTELFUSE	Electric Fuse, Fast Blow, 250A, 1000VDC, 10000A (IR), Inline/holder, ROHS COMPLIANT	获取价格