SNC21300A
1-CH H.Q. Speech Controller
1. INTRODUCTION
SNC21300A is a one-channel voice synthesizer IC with Push-Pull direct drive circuit.
It built-in a 4-bit tiny controller with six 4-bit I/O ports. By programming through the tiny
controller in SNC21300A, user’s varied applications including voice section
combination, key trigger arrangement, output control, and other logic functions can be
easily implemented.
2. FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Single power supply 2.4V – 5.5V
System Clock is 2MHz, the instruction cycle is 4us
300 seconds voice capacity are provided (@6KHZ sample rate)
Built in a 4-bit tiny controller
I/O Port
ꢁ Six 4-bit I/O ports P1, P2, P3, P4, P5 and P6 are provided
ꢁ The driving/sink current of P3.2 ~ P3.3 & P4.0~P4.3 is up to 8mA/16mA
ꢁ The IO pins P3.3 or P2.3 can be modulated with 38.5KHz carry signal to
implement IR function.
ꢁ 6 PWM output for IO (P3.0~P3.3 & P6.0~P6.1)
128*4 bits RAM are provided
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Maximum 16k program ROM is provided
912K*10 shared ROM for voice data and program
Readable ROM code data
Built-in one channel High Quality speech synthesizer
Adaptive playing speed from 2.5k-20kHz is provided
Automatic repetition
Support 5-bit ADPCM and 10 bit PCM format.
Built in an 8-level volume control Push-Pull DAC circuit output, can directly
connected to Speaker for sound output.
12 bit Push-Pull DA output and 12 bit current DAC output
Event Mark function supported.
ꢀ
ꢀ
ꢀ
ꢀ
Low-Voltage Detect circuit
Watch Dog Timer Reset function.
3
Ver1.1
November 6, 2009