5秒后页面跳转
SMCJ51 PDF预览

SMCJ51

更新时间: 2024-02-02 02:41:24
品牌 Logo 应用领域
力特 - LITTELFUSE 局域网光电二极管
页数 文件大小 规格书
6页 1057K
描述
Trans Voltage Suppressor Diode, 1500W, 51V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN

SMCJ51 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:DO-214AB
包装说明:R-PDSO-C2针数:2
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8541.10.00.50风险等级:5.11
其他特性:LOW INDUCTANCE, EXCELLENT CLAMPING CAPABILITY, UL RECOGNIZED最大击穿电压:65.67 V
最小击穿电压:53.73 V击穿电压标称值:59.7 V
最大钳位电压:82.4 V配置:SINGLE
二极管元件材料:SILICON二极管类型:TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95代码:DO-214ABJESD-30 代码:R-PDSO-C2
JESD-609代码:e3湿度敏感等级:1
最大非重复峰值反向功率耗散:1500 W元件数量:1
端子数量:2最高工作温度:150 °C
最低工作温度:-55 °C封装主体材料:PLASTIC/EPOXY
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):260极性:UNIDIRECTIONAL
认证状态:Not Qualified最大重复峰值反向电压:51 V
子类别:Transient Suppressors表面贴装:YES
技术:AVALANCHE端子面层:Matte Tin (Sn)
端子形式:C BEND端子位置:DUAL
处于峰值回流温度下的最长时间:40Base Number Matches:1

SMCJ51 数据手册

 浏览型号SMCJ51的Datasheet PDF文件第2页浏览型号SMCJ51的Datasheet PDF文件第3页浏览型号SMCJ51的Datasheet PDF文件第4页浏览型号SMCJ51的Datasheet PDF文件第5页浏览型号SMCJ51的Datasheet PDF文件第6页 
TransientVoltage Suppression Diodes  
Surface Mount – 1500W > SMCJ series  
Pb e3  
RoHS  
SMCJ Series  
Description  
Uni-directional  
The SMCJ series is designed specifically to protect  
sensitive electronic equipment from voltage transients  
induced by lightning and other transient voltage events.  
Bi-directional  
Features  
• 1500W peak pulse power • Fast response time:  
capability at 10/1000μs  
waveform, repetition rate  
(duty cycles):0.01%  
• Excellent clamping  
capability  
typically less than 1.0ps  
from 0V to BV min  
• Glass passivated chip  
junction  
• High temperature  
to reflow soldering  
guaranteed: 260°C/40sec  
Agency Approvals  
• Low incremental surge  
resistance  
AGENCY  
AGENCY FILE NUMBER  
E230531  
Typical IR less than 1μA  
when VBR min>12V  
• For surface mounted  
applications to optimize  
board space  
• Low profile package  
• Built-in strain relief  
Typical failure mode is  
short from over-specified  
voltage or current  
• Whisker test is conducted  
based on JEDEC  
JESD201A per its table 4a  
and 4c  
• IEC-61000-4-2 ESD  
30kV(Air), 30kV (Contact)  
• VBR @TJ= VBR@25°C  
x (1+αT x (TJ - 25))  
(αT:Temperature  
Coefficient, typical value  
is 0.1%)  
• Plastic package is  
flammability rated V-0 per  
Underwriters Laboratories  
• Meet MSL level1, per  
J-STD-020, LF maximun  
peak of 260°C  
• Matte tin lead–free plated  
• Halogen free and RoHS  
compliant  
• Pb-free E3 means 2nd  
level interconnect is  
Pb-free and the terminal  
finish material is tin(Sn)  
(IPC/JEDEC J-STD-  
609A.01)  
Maximum Ratings andThermal Characteristics  
(TA=25OC unless otherwise noted)  
Parameter  
Symbol  
PPPM  
Value  
1500  
Unit  
W
Peak Pulse Power Dissipation at  
TA=25ºC by 10/1000µs Waveform  
(Fig.2)(Note 1), (Note 2), (Note 5)  
Power Dissipation on Infinite Heat  
Sink atTL=50OC  
PD  
6.5  
W
A
Peak Forward Surge Current, 8.3ms  
Single Half Sine Wave (Note 3)  
IFSM  
200  
Maximum Instantaneous Forward  
Voltage at 100A for Unidirectional  
Only (Note 4)  
VF  
3.5/5.0  
V
OperatingTemperature Range  
TJ  
-65 to 150  
-65 to 175  
°C  
°C  
StorageTemperature Range  
TSTG  
• ESD protection of data  
lines in accordance with  
IEC 61000-4-2  
• EFT protection of data  
lines in accordance with  
IEC 61000-4-4  
TypicalThermal Resistance Junction  
to Lead  
°C/W  
°C/W  
RθJL  
RθJA  
15  
75  
TypicalThermal Resistance Junction  
to Ambient  
Notes:  
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.  
Applications  
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.  
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional  
device only, duty cycle=4 per minute maximum.  
TVS devices are ideal for the protection of I/O Interfaces,  
CC bus and other vulnerable circuits used inTelecom,  
Computer, Industrial and Consumer electronic  
applications.  
V
4. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.  
5. The PPPM of stacked-die parts is 2000W and please contact littelfuse for the detail  
stacked-die parts.  
Functional Diagram  
Additional Infomarion  
Bi-directional  
Datasheet  
Samples  
Resources  
Cathode  
Anode  
Uni-directional  
© 2015 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 11/20/15  

SMCJ51 替代型号

型号 品牌 替代类型 描述 数据表
SMCJ54A LITTELFUSE

类似代替

Silicon Avalanche Diodes - 1500W Surface Mount Transient Voltage Supressors
SMCJ51A LITTELFUSE

类似代替

Silicon Avalanche Diodes - 1500W Surface Mount Transient Voltage Supressors
1.5SMC62A LITTELFUSE

类似代替

Silicon Avalanche Diodes - 1500W Surface Mount Transient Voltage Supressors

与SMCJ51相关器件

型号 品牌 获取价格 描述 数据表
SMCJ51 / C SWST

获取价格

瞬态电压抑制管
SMCJ51(C) BYTESONIC

获取价格

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
SMCJ51(C)A FAIRCHILD

获取价格

DEVICES FOR BIPOLAR APPLICATIONS
SMCJ51(C)A BYTESONIC

获取价格

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
SMCJ51.TB SEMTECH

获取价格

Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB
SMCJ51/9 VISHAY

获取价格

Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLAST
SMCJ51/9A VISHAY

获取价格

Trans Voltage Suppressor Diode, 51V V(RWM), Unidirectional,
SMCJ51/9AT VISHAY

获取价格

Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLAST
SMCJ51-57-E3 VISHAY

获取价格

Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLAST
SMCJ51-9A VISHAY

获取价格

Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLAST