SL10 Series Slot Sensor
Specifications
Supply Voltage and Current
Environmental Rating
IEC IP67; NEMA 6
10 to 30V dc (10% max. ripple), 30 mA
Supply Protection Circuitry
Operating Conditions
Protected against reverse polarity and transient voltages
−40 °C to +70 °C (−40 °F to +158 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Required Overcurrent Protection
Output Configuration
Bipolar: NPN and PNP
Output Rating
WARNING: Electrical connections must be made by
150 mA, each output
qualified personnel in accordance with local and
Output Protection Circuitry
national electrical codes and regulations.
Protected against output short-circuit and false pulse on power up
Overcurrent protection is required to be provided by end product application per the
supplied table.
Output Response Time
1 millisecond or 300 microseconds, depending on model
Overcurrent protection may be provided with external fusing or via Current Limiting,
Class 2 Power Supply.
Repeatability
250 microseconds or 75 microseconds, depending on model
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Adjustments
4-turn clutched potentiometer sensitivity adjustment
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
Slot Opening
10 mm (0.4 in) wide x 45 mm (1.8 in) deep overall; beam set in 10 mm (0.4 in) from
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
outer edge
Indicators
Green: Power on/off indicator
Amber: Signal condition indicator
Construction
Housing: ABS/polycarbonate blend
Optic windows: acrylic
Connections
2 m (6.5 ft) or 9 m (30 ft) 5-conductor PVC-jacketed attached cable or 5-pin Euro-style
quick-disconnect (QD) connector
Certifications
E224071
Dimensions
10.0 mm
(0.39)
10.0 mm
(0.39)
45.0 mm
(1.77")
72.0 mm
(2.84")
Power LED
(Green)
Signal LED
(Amber)
6.0 mm
(0.24")
20.2 mm (0.80")
40.0 mm
(1.58")
2x ø5.6 mm
(0.22")
6.0 mm
(0.24")
M12 x 1
52.0 mm
(2.05")
17.5 mm
(0.69")
18.8 mm
(0.74")
11.5 mm
(0.45")
All measurements are listed in millimeters [inches], unless noted otherwise.
P/N 58341 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
3